User`s guide
Table Of Contents
- Overview
- Getting Started
- System Setting
- Making Measurements
- Measuring Multiple Signals
- Measuring a Low-Level Signal
- Improving Frequency Resolution and Accuracy
- Making Distortion Measurements
- One-button Power Measurement
- Making a Stimulus Response Transmission Measurement
- Measuring Stop Band Attenuation of a Low-pass Filter
- Making a Reflection Calibration Measurement
- Measuring Return Loss Using the Reflection Calibration Routine
- Making an Average Power Measurement
- Key Reference
- SCPI Command Reference
- Error Messages
- Menu Map
6 SCPI Command Reference
148 N9340A User’s Guide
SWEep Subsection
Sweep Time
[:SENSe]:SWEep:TIME <time>
[:SENSe]:SWEep:TIME?
This command specifies the time in which the
instrument sweeps the display.
Automatic Sweep Time
[:SENSe]:SWEep:TIME:AUTO OFF|ON|0|1
[:SENSe]:SWEep:TIME:AUTO?
This command automatically selects the fastest
sweep time for the current settings.
Sweep Mode
[:SENSe]:SWEep:TIME:AUTO:MODE:NORMal|FAST
[:SENSe]:SWEep:TIME:AUTO:MODE?
This command toggles the sweep mode between
normal and fast.
*RST State: 1.076067 s
Range: 10 ms to 1000 s
Available unit: ks, s, ms, us
Key Access: [BW/SWP] > {Sweep Time}
*RST State: On
Key Access: [BW/SWP] > {Sweep Time}
*RST State: Normal
Key Access: [BW/SWP] > {Sweep} > {Sweep Mode}