Product specifications

11
Figure 8. Select a state file
Demonstration 5
Task planner (continued)
Action 2: Compile task plan file (.TPF) with the free N934xC
HSA PC software
Instructions for HSA Keystrokes for HSA
Make sure the Agilent I/O
library and the N934xC HSA
PC software are correctly
installed. Connect the N934xC
HSA and PC via a USB cable
Run the N934xC HSA PC
software
Note: In order for the Agilent
I/O library to “discover” the
HSA USB connection, you
must connect the instrument
to the PC via the USB cable
and follow the “wizard”
directions. Running the Agilent
Connection Expert within the
I/O library may be required
Click the shortcut key of
Agilent HSA PC software on
the PC screen
Establish the connection
between the PC and the
N934xC HSA
• Click the connection
shortcut in the toolbar as
shown in Figure 5
• Select the N934xC HSA
in the connect instrument
dialog box
• Click “Ok”
Add state files into the task
plan file
• Click “Instruments” then
“Task Plan Editor” to open
the task plan editor as
shown in Figure 6
• Click “Add Task” in the
task plan editor dialog box
as shown in Figure 7
Note: If these state files
are on the PC, you should
choose media type “PC”
before clicking “Add Task”
button
• Double click the “Driver C”
in the “Select a state file
to create a task” dialog box
as shown in Figure 8
• Double click file WCDMA_
CHP.STA
• Repeat the steps from b to
d to add WCDMA_OBW.
STA, and WCDMA_ACPR.
STA to the task plan
Note: If these state files are on the PC, you should choose media
type “PC” before clicking “Add Task” button.
Figure 5. Connect to the N934xC HSA
Figure 6. Task plan editor
Figure 7. Add from the device