Product specifications

15
Step 3: Run task planner
Instructions for the
source
Keystrokes for the
source
Set 2 GHz center frequency,
amplitude -10 dBm, W-CDMA
signal
[Preset], [Freq], [2], {GHz},
[Amplitude], [-10], {dBm},
[Mode], {W-CDMA}, {Arb
W-CDMA (3GPP 12-2004},
{W-CDMA (On)}, [Mod On],
[RF On]
Instructions for HSA Keystrokes for HSA
Load the task plan file [Shift], [File], use the rotating
knob to choose W-CDMA.tpf,
[Enter]
Run the task plan file
(Figure 15)
{Run}
Run task 1: Channel power • Press [Enter] after the
“chp begin Enter/Esc to
Confirm” message appears
• Press [Enter] after the “chp
end Enter/Esc to Confirm”
message appears
Run task 2: OBW • Press [Enter] after the
“obw begin Enter/Esc to
Confirm” message appears
• Press [Enter] after the
“obw end Enter/Esc to
Confirm” message appears
Run task 3: ACPR • Press [Enter] after “acpr
begin Enter/Esc to
Confirm” message appears
• Press [Enter] after “acpr
end Enter/Esc to Confirm”
message appears
N934xC HSA automatically
creates a folder whose name
is the same as the task plan
file name (for this demo,
the directory is named as
W_CDMA) to save all report
contents, including a text
report, screenshots, and trace
files depending on the choices
of report contents. The PASS/
FAIL result is shown in the
report (Figures 17 to 19)
Demonstration 5
Task planner (continued)
Figure 17. Channel power measurement result
Figure 18. OBW measurement result
Figure 19. ACPR measurement result