user manual

Chapter 2 67
Using System Features
Using File and Save Keys
Using File and Save Keys
The File and Save keys enable you to save instrument states to memory
and to load instrument states into the instrument from memory. For
instructions on how to save a screen image to a floppy disc, see Saving a
Screen Image to a Floppy Disc on page 63.
Loading a State
1. Press File, Load State. A label in the active function area will read
Load State.
2. Use the numeric keypad to enter the number of the register from
which you desire to retrieve a state (you can retrieve states from
registers 0 to 19), then press the
Enter key.
Saving a State
1. Press File, Save State or press the front panel Save key. An active
function labeled
Save State will appear.
2. Use the numeric keypad to enter the desired state number (you can
enter values from 0 to 19), then press the
Enter key.
Front Panel Key Level 1 Level 2 Level 3
File Load State numeric entry Enter
Save State
numeric entry Enter
Save
numeric entry Enter