Specifications

Full-featured digital multimeter functions – make more than just current measurements
The U1210 Series clamp meters are
versatile handheld test tools that combine
a current clamp with a digital multimeter
(DMM).
The U1210 Series provides basic
functions of a multimeter with wide
measurement ranges to cater for a broad
range of applications: ACA, DCV, ACV,
OHM, audible continuity, capacitance,
diode and frequency tests.
These meters also provide auto-ranging
capability, built-in peak hold for in-rush
current measurement, temperature and
capacitance measurement capability,
large backlight display and one-hand
operation.
Specifi cations of the U1210 Series Clamp Meters
represents key specifi cations/features
U1211A U1212A U1213A
Display
Dual display Yes Yes Yes
Counts 4000 4000 4000
Bar-graph 12 segments 12 segments 12 segments
Backlit Yes Yes Yes
Auto power OFF Yes Yes Yes
Basic features
True RMS AC AC/DC AC+DC
Auto/manual ranging Yes Yes Yes
Measurements
Voltage DC 0.1 - 1000 V (0.5%) 0.1 - 1000 V (0.5%) 1 mV - 1000 V (0.2%)
Voltage AC 0.1 - 1000 V (1.0%) 0.1 - 1000 V (1.0%) 1 mV - 1000 V (1.0%)
Current DC N/A 0.01 - 1000 A (1.5%) 0.01 - 1000 A (1.5%)
Current AC 0.1 - 1000 A (1.0%) 0.1 - 1000 A (2.0%) 0.01 - 1000 A (2.0%)
Resistance 4 kΩ (0.5%) 4 kΩ (0.5%) 40 MΩ (0.3%)
Capacitance 0.1 - 4000 µF (2.0%) 0.1 - 4000 µF (2.0%) 1 - 4000 µF (1.0%)
Diode Yes Yes Yes
Temperature N/A K-type (–200 to 1372 °C) K-type (–200 to 1372 °C)
Frequency Yes Yes Yes
Duty cycle N/A N/A Yes
Accuracy information shown in brackets is the best accuracy throughout the range.
22