Specifications

Applications with the U1700 Series Capacitance/LCR Meters
SMD tweezer for testing
surface-mount devices
The optional U1782B SMD tweezer
enables easy testing of surface-mount
devices. The tweezer comes with three
shrouded banana plugs and an extended
reach of 770 mm. The U1700 Series
guard terminal provides your measure-
ments with better noise immunity and
accurate readings.
The U1730C Series handheld is a LCR meter
with a wide range of test frequencies of up
to 100 kHz. It also covers wide measure-
ment parameters including Z, L, C, R,
DCR, ESR as well asD, Q, and Θ for
more detailed component analysis. These
features make the U1730C Series ideal
both in component evaluations on the
production line and for fundamental
impedance testing.
Tolerance and compare modes for quick component sorting
On the manufacturing fl oor, components
may come in large batches for quick
sorting to pre-defi ned specifi cations.
Tolerance mode in the U1700 Series
lets you zap through sorting of incoming
capacitors, inductors or resistors to 1%,
5%, 10% or 20% tolerance of the
specifi ed reference value.
Additionally, compare mode in the
U1701B capacitance meter allows easy
memory save/recall of up to 25 High/
Low limit settings for convenient Pass/
Fail screening of capacitors. This means
speedier testing due to reduced set-up
time and risk of manual input errors.
Tolerance mode of 1%, 5%, 10% and 20%
are available in capacitance and LCR models.
Compare mode in the U1701B reduces test set-up time for capacitor sorting.
33