Specifications

Model No. U1602B U1604B U1610A U1620A
Vertical System: Scope Channels
Bandwidth (-3 dB) 20 MHz 40 MHz 100 MHz 200 MHz
DC vertical gain accuracy 5 mV/div to 20 mV/div: ± 5% full scale
50 mV/div to 100 V/div: ± 3% full scale
±2% of full scale
Full scale is equivalent to 8 div
Acquisition: Scope Channels
Maximum sample rate
Single Channel Operation
Dual Channel Operation
200 MSa/s interleave
100 MSa/s each channel
1 GSa/s interleave
500 MSa/s each channel
2 GSa/s interleave
1 GSa/s each channel
Vertical resolution 8-bits 8-bits
Maximum recording length
Single Channel Operation
Dual Channel Operation
125 Kpts 125 Kpts 120 Kpts interleave
60 Kpts each channel
2 Mpts interleave
1 Mpts each channel
Vertical System: Scope Channels
Rise time <17.5 ns <8.8 ns 3.50 ns typical 1.75 ns typical
Maximum input CAT III 300 Vrms (up to 400 Hz) from terminal
to ground
CAT III 600 V (with 10:1 probe)
CAT III 300 V (direct)
Bandwith limit N/A 10 KHz and 20 MHz (selectable)
Channel-to-channel isolation N/A Yes, CAT III 600 V
Probe attentuation factors 1x, 10x, 100x 1x, 10x, 100x
Our handheld scopes are designed to be used across a wide range of applications and troubleshooting tasks. Each model come with
different specifi cations to tailor to your needs, and are safety certifi ed for safer measurements.
Oscilloscopes
Horizontal System
Range 50 ns to 50 s/div 10 ns to 50 s/div 5 ns/div to 50 s/div 2 ns/div to 50 s/div
Modes Main, XY, roll Main, zoom, XY, roll
Trigger system
Sources Channel 1 and Channel 2 Channel 1, Channel 2, External
Modes Auto, normal, single Normal, Single, Auto
Types Edge, Pattern, Pulse Width, Video Edge, Glitch, TV, Nth Edge, CAN, LIN
Auto measurements Peak-to-peak, maximum, minimum, amplitude, top,
base, +overshoot, –overshoot, preshoot, RMS, mean
and one cycle mean, Frequency, period, +width, –
width, and +duty cycle and –duty cycle on any channel.
Rise time, fall time, delay and phase shift
Delay, duty cycle (+/–), fall/rise time, frequency, period,
phase shift, T-max,
T-min, width (+/–), amplitude, average, base, crest, cycle
mean, maximum,
minimum, overshoot, peak-to-peak, preshoot, standard
deviation, top,
Vrms (AC/DC), active/apparent/reactive power, power
factor
Waveform math functions CH1 + CH2, CH1 – CH2, CH2 – CH1 CH1 + CH2, CH1 – CH2, CH2 – CH1, CH1 × CH2, CH1/
CH2, CH2/CH1, d/dt (CH1),
d/dt (CH2), ∫(CH1)dt, ∫(CH2)dt, FFT
Digital Multimeter measurement
Voltage AC/DC range 600 mV to 600 V 1000 mV to 1000 V
Resistance range 600 Ω to 60 MΩ 1000 Ω to 100 MΩ
Capacitance range 60 nF to 300 uF 1000 nF to 10 mF
Diode range 1 V 1 V
Temperature range 600 °C –50 to 1000 °C
Frequency N/A 100 Hz to 1000 KHz
AC Current range 60 A N/A
Measurement characteristic
Resolution 6,000 counts 10,000 counts
Continuity Beeper < 60 W in 600 W range Continuous beep when resistance <10 Ω
Datalogger Yes Yes
5