Technical data

38 U8001A/U8002A User’s and Service Guide
3 Operations and Features
Memory Operations
For Agilent U8001A/U8002A single output DC power
supplies, up to three operating states can be stored in
non- volatile storage locations. The storage feature
remembers the voltage and current limit value settings,
OVP
*
/OCP
†
On/Off states, and OVP/OCP trip levels. The
following steps show you how to store and recall an
operating state.
Storing Operating State
1 Press on the “Memory” button.
• The M1 annunciator will blink.
2 Turn the knob to choose the memory location for
storing the operation state.
• The M1, M2 and M3 annunciators will blink in a
round- robin manner.
3 Press on the “Memory” button again to save the
operating state in the chosen memory.
• Display will show “donE”.
• The M1, M2 and M3 annunciators will be turned off.
* OVP- over voltage protection
† OCP- over current protection
NOTE
To cancel the operation, allow the unit to idle for five seconds.