Specifications

ManualsBrandsAgilent Technologies ManualsAdapterX/P/K281C

PNA Family Network Analyzer Upgrade Kits (continued)

Application options

Upgrade kits are available to add options after initial purchase. To upgrade the PNA-X/PNA/PNA-L, order the corresponding

item number. The model and serial numbers of the instrument to be retrofitted are required as part of the order.

1. For measuring frequency converters, Option 082 or 083 is required.

2. Requires configurable test set for signal conditioning of noise figure measurements using standard receivers. Therefore it is not available with

N522xA-200 and -400.

3. Two-tone signal must be routed to R1 receiver after an external combiner; therefore it is not available with N522xA-200 and 400.

4. When used with an external signal generator, configurable test set is required to access a receiver. Therefore it is not available with N522xA-200.

5. To connect a multiport test set, configurable test set is required. Therefore it is not available with N522xA-200/400, and N523xA-200/400.

Description Required Option

For PNA-X

Series

For PNA

Series

For PNA-L

Series

User

Installable

Measurement applications

Time-domain measurements N524xAU-010 N522xAU-010 N523xAU-010 Yes

Noise ﬁgure measurements using standard

receivers

Option 080

1,2

N524xAU-028 N522xAU-028 n/a Yes

Fully-corrected noise ﬁgure measurements

for PNA-X, 2-ports

Option 080 and for N5241/42A, one

of Options 219, 224 or H85

For N5244/45/47A, 080 and 224

N524xAU-924 n/a n/a No

Fully-corrected noise ﬁgure measurements

for PNA-X, 4-ports

Option 080 and for N5241/42A, one

of Options 419, 423 or H85

For N5244/45/47A, 080 and 423

N524xAU-929 n/a n/a No

Frequency offset N524xAU-080 N522xAU-080 N523xAU-080 Yes

Scalar-calibrated converter measurements Option 080 N524xAU-082 N522xAU-082 N523xAU-082 Yes

Vector- and scalar-calibrated converter

measurements

Option 080 N524xAU-083 N522xAU-083 n/a Yes

Embedded LO measurements Option 082 or 083 N524xAU-084 N522xAU-084 n/a Yes

Gain compression application See Footnote 1 N524xAU-086 N522xAU-086 n/a Yes

Intermodulation distortion application Option 080

1,3

N524xAU-087 N522xAU-087 n/a Yes

Source phase control See Footnote 4 N524xAU-088 N522xAU-088 n/a Ye s

Integrated true-mode stimulus application Option 400, 401, 417, 419, or 423 N524xAU-460 N522xAU-460 n/a Ye s

N-port capabilities See Footnote 5 N524xAU-551 N522xAU-551 N523xAU-551 Yes

Pulse, antenna, mm-wave

Pulsed-RF measurements Option 025

N524xAU-008 N522xAU-008 n/a Yes

Add IF inputs N524xAU-020 N522xAU-020 n/a Yes

Add pulse modulator to internal 1st source N524xAU-021 N522xAU-021 n/a Yes

Add pulse modulator to internal 2nd source Option 224, 400, 401, 417, 419, or 423 N524xAU-022 N522xAU-022 n/a Yes

Add four internal pulse generators N524xAU-425 N522xAU-425 n/a Yes

Fast CW sweep N524xAU-118 N522xAU-118 n/a Yes

Nonlinear network vector analysis

Nonlinear component characterization Options 419 and 080, or 400, H85

and 080

N524xAU-510 n/a n/a Yes

Nonlinear X-parameters

Options 423 and 510 N524xAU-514 n/a n/a Yes

Nonlinear pulse envelope domain Requries Options 021, 025 and

either one of 510 or 514

N524xAU-518 n/a n/a Yes

Arbitrary load-impedance X-parameters Option 514 N524xAU-520 n/a n/a Yes

Calibration software

Perpetual license for built-in performance

test software for Agilent inclusive calibration

N524xAU-897 N522xAU-897 N523xAU-897 Yes

Perpetual license for built-in performance

test software for standard compliant

calibration

N524xAU-898 N522xAU-898 N523xAU-898 Yes