Specifications

29
For devices with 7 mm connectors
Mechanical calibration kits
85050B standard: DC to 18 GHz.
Includes:
00909-60008 7 mm coax termination
85050-60006 7 mm fixed broadband load
85050-80007 7 mm short
85050-80010 7 mm open
85050-80011 7 mm sliding load
85050C precision TRL: DC to 18 GHz.
Includes:
00909-60008 7 mm coax termination
85050-60003 7 mm to 7 mm airline
85050-60005 7 mm to 7 mm TRL adapter
85050-60006 7 mm fixed broadband load
85050-80008 7 mm short
85050-80009 7 mm short collet
85050-80010 7 mm open
85050D economy: DC to 18 GHz.
Includes:
85050-60006 7 mm fixed broadband load
85050-80007 7 mm short
85050-80010 7 mm open
Electronic calibration kits
N4696B Microwave ECal: 300 kHz to 18 GHz, 2-ports,
7mm to 7mm Microwave module
Cables
1
85132E single, flexible: 3.5 mm (f) to 7 mm,
97.2 cm, 38.25 inches
2
85132F set, flexible: two 3.5 mm (f) to 7 mm cables,
62.9 cm each, 24.75 inches each
2
, p/n 85132-60004
85135E single, flexible: 2.4 mm (f) to 7 mm,
96 cm, 38 inches
85135F set, flexible: two 2.4 mm (f) to 7 mm cables,
53 cm each, 21 inches each, p/n 85135-60002
Adapter sets
85130E 2.4 mm
1
to 7 mm
For devices with waveguide
Mechanical calibration kits
X Band
X11644A standard, WR-90: 8.2 to 12.4 GHz. Includes:
00896-60008 X-band standard section
00910-60003 X-band termination
11644-20018 X-band short
11644-20021 X-band shim
85132F cable set (set, flexible 3.5 mm (f) to 7 mm,
62.9 cm each, 24.75 inches each
2
)
85135F cable set (set, flexible,
2.4 mm (f) to 7 mm, 53 cm each, 21 inches each)
X281C adapter (included in calibration kit):
WR-90 to 7 mm
P Band
P11644A standard, WR-62: 12.4 to 18 GHz.
Includes:
00896-60007 P-band standard section
00910-60002 P-band termination
11644-20017 P-band short
11644-20020 P-band shim
85132F cable set (set, flexible, 3.5 mm (f) to 7 mm,
62.9 cm each, 24.75 inches each
2
)
85135F cable set (set, flexible, 2.4 mm (f) to 7 mm,
53 cm each, 21 inches each)
P281C adapter (included in calibration kit):
WR-62 to 7 mm
K Band
K11644A standard, WR-42: 18 to 26.5 GHz.
Includes:
00896-60006 K-band standard section
00910-60001 K-band termination
11644-20016 K-band short
11644-20019 K-band shim
85134F cable set (set, flexible, 2.4 mm (f) to 3.5 mm (f) and (m),
53 cm each, 21 inches each)
K281C adapter (included in calibration kit):
WR-42 to 3.5 mm (f)
Option 012 WR-42 to 3.5 mm (m)
R Band
R11644A standard, WR-28: 26.5 to 40 GHz.
Includes:
00914-20028 R-band termination
11644-20005 R-band short
11644-20003 R-band shim
11644-60001 R-band 10 cm straight waveguide
11644-60016 R-band 5 cm straight waveguide
85133F cable set (set, flexible, 2.4 mm, 53 cm each,
21 inches each)
R281A adapter (2.4 mm (f) to WR-28 waveguide
adapter)
R281B adapter (2.4 mm (m) to WR-28 waveguide
adapter)
1. For use with E8362C.
2. Special rugged female connector specifically for connecting to the
network analyzer test port, but does not mate with a standard
male connector.