Specifications
31
Amplifiers
□ 83006A power amplifier, 10 MHz to 26.5 GHz, 20 dB gain,
power out: +18 dBm to 10 GHz or +16 dBm to 20 GHz or
+14 dBm to 26.5 GHz
□ 83017A power amplifier, 50 MHz to 26.5 GHz, 25 dB gain,
power out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz
□ 83018A power amplifier, 2 to 26.5 GHz, 27 dB gain to 20 GHz
or 23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz or
+21 dBm to 26.5 GHz
□ 83020A power amplifier, 2 to 26.5 GHz, 30 dB gain to 20 GHz
or 27 dB to 26.5 GHz, power out: +30 dBm to 20 GHz or
+26 dBm to 26.5 GHz
□ 83050A power amplifier, 2 to 50 GHz, 23 dB gain, power out:
+20 dBm to 40 GHz or +17 dBm to 50 GHz
□ 83051A power amplifier, 45 MHz to 50 GHz, 23 dB gain power out:
+12 dBm to 45 GHz or +10 dBm to 50 GHz
Couplers
□ 87300B coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB coupling
□ 87300C coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB coupling
□ 87301B coaxial coupler, 10 to 46 GHz, 2.92 mm (f), 10 dB coupling
□ 87301D coaxial coupler, 1 to 40 GHz, 2.4 mm (f) or optional
2.92 mm (f), 13 dB coupling
□ 87301E coaxial coupler, 2 to 50 GHz, 2.4 mm (f), 10 dB coupling
□ 87310B 90
o
coaxial coupler, 1 to 18 GHz, SMA (f), 3 dB coupling
Equipment rack accessories
□ E3663AC Rail kit (included with Option 1CM and 1CP)
□ ICM042A Rack mount kit, for use without handles (included
with Option 1CM)
□ 5063-9224 Rack mount kit with handles
3
□ 5063-9230 Front handle kit
3
□ 5063-9237 Rack mount kit, for use with classic handles
(included with Option 1CP)
3
Monitors
VGA-compatible monitor
Interface cables
Choose the appropriate cables to connect each
peripheral to the network analyzer.
□ 10833A GPIB cable, 1.0 m (3.3 ft)
□ 10833B GPIB cable, 2.0 m (6.6 ft)
□ 10833D GPIB cable, 0.5 m (1.6 ft)
□ 82357B GPIB to USB interface
1. For more information on solid-state drive, refer to na.tm.agilent.com/
pna/hdnumbers.html
2. For the latest guide to power meters and power sensors, refer to the
Agilent web site: www.agilent.com/find/powermeters
3. 5063-9224 is a complete rack mount kit with handles. N52xxA comes
with ruggedized handles, which must be replaced with classic handles
shipped with the kit. 5063-9230 is a pair of classic handles, and used
with 5063-9237 for mounting N52xxA to a rack.
General Accessories
Spare drive
1
□ N8981A spare solid-state drive with mounting cradle
For E836xA/B and N5230A.
□ N8982A spare solid-state drive with mounting cradle
For E836xC and N5230C.
□ N5242-60044 spare solid-state drive with mounting cradle
For N524xA with 2.0 GHz Core 2 Duo CPU.
□ N5242-60088 spare solid-state drive with mounting cradle
For N522xA/4xA with 2.0 GHz Core i7 CPU.
□ N5235-60060 spare solid-state drive with mounting cradle
For N523xA with 1.87 GHz Celeron CPU.
Spare solid-state drive for N5242A/1A with 1.6 GHz Pentium M
CPU is discontinued. Upgrading to 2.0 GHz Core i7 CPU (W1312-
60196) is recommended.
Probe
□ 85024A high-frequency probe
Provides high-impedance in-circuit test capability from
300 kHz to 3 GHz.
Power meters and sensors
2
Recommended for self support, adjustments and performance
tests to verify proper instrument operation.
□ N1913A EPM power meter (single channel)
□ N1914A EPM power meter (dual channel)
□ N8481A power sensor, 10 MHz to 18 GHz, -35 to +20 dBm
□ N8481B power sensor, 10 MHz to 18 GHz, -5 to +44 dBm
□ N8481H power sensor, 10 MHz to 18 GHz, -15 to +35 dBm
□ N8482A power sensor, 100 kHz to 6 GHz, -35 to +20 dBm
□ N8482B power sensor, 100 kHz to 6 GHz, -5 to +44 dBm
□ N8482H power sensor, 100 kHz to 6 GHz, -15 to +35 dBm
□ N8485A power sensor, 50 MHz to 26.5 GHz, -35 to +20 dBm
□ N8485A-033 average power, 10 MHz to 33 GHz, -35 to +20 dBm,
3.5 mm (m)
□ N8486AQ waveguide, 33 to 50 GHz, -35 to +20 dBm
□ N8486AR waveguide, 26.5 to 40 GHz, -35 to +20 dBm
□ N8487A power sensor, 50 MHz to 50 GHz, -35 to +20 dBm
□ N8488A power sensor, 10 MHz to 67 GHz, -35 to +20 dBm
□ V8486A waveguide power sensor, 50 to 75 GHz , -30 to +20 dBm
□ W8486A waveguide power sensor, 75 to 110 GHz , -30 to +20 dBm
□ U2000A USB sensor, 10 MHz to 18 GHz, -60 to +20 dBm
□ U2000B USB sensor, 10 MHz to 18 GHz, -30 to +44 dBm
□ U2000H USB sensor, 10 MHz to 18 GHz, -50 to +30 dBm
□ U2001A USB sensor, 10 MHz to 6 GHz, -60 to +20 dBm
□ U2001B USB sensor, 10 MHz to 6 GHz, -30 to +44 dBm
□ U2001H USB sensor, 10 MHz to 6 GHz, -50 to +30 dBm
□ U2002A USB sensor, 50 MHz to 24 GHz, -60 to +20 dBm
□ U2002A-H26 USB sensor, 10 MHz to 26.5 GHz, -60 to +20 dBm
□ U2002H USB sensor, 50 MHz to 24 GHz, -50 to +30 dBm
□ U2004A USB sensor, 9 kHz to 6 GHz, -60 to +20 dBm
□ E4412A CW power sensor, 10 MHz to 18 GHz, -70 to +20 dBm
□ E4413A CW power sensor, 50 MHz to 26.5 GHz, -70 to +20 dBm
□ E4413A-H33 specified performance for 50 MHz to 33 GHz
Comb generators
Two are required for NVNA. Also requires separate power supply.
□ U9391C 10 MHz to 26.5 GHz comb generator
□ U9391F 10 MHz to 50 GHz comb generator
□ U9391G 10 MHz to 67 GHz comb generator