User's Manual

12 AGM Global Vision

2 OPERATING INSTRUCTIONS

2.1. BASIC OPERATIONS

2.1.1 UNPACKING

The following steps must be completed prior to each mission.

1. Open the carrying case, remove the device, and verify that all

components are included.

2. Inspect the device for any obvious evidence of damage to the

optical surfaces, body, eyecup, operation buttons, etc. Ensure

that all optical surfaces are clean and ready for use. Clean all

optical surfaces with a lens tissue.

2.1.2 CHARGING THE BUILT-IN BATTERY

When the device is turned on, the OSD (on-screen display) shows the

battery status. Icon

means the battery is fully charged, and icon

means that the battery is low.

When the low power note shows, charge the battery.

NOTE:

Please charge the battery with the delivered USB cable and power

adapter. The charging temperature should be 0°C to 45°C (32°F to

113°F).

FIGURE 2-1. USB INTERFACE