User's Manual

13HORUS USER MANUAL

1. Unscrew the USB interface cover (Figure 2-1, A).

2. Connect the power adapter to the scope’s interface port (B) using

the USB cable (C).

3. Plug in the power adapter and charge the device. Icon

in the

FOV of scope indicates the charging process. The color LED (D)

near USB port indicates the charging status.

TABLE 2-1. BATTERY LED INDICATOR STATUS

INDICATOR FUNCTIONS

Flashing Red & Green Error occurred.

Solid Red Battery is properly charging.

Solid Green Battery is fully charged.

Off Battery is not charged.

2.1.3 ADDITIONAL CR123A BATTERY INSTALLATION

1. Turn the battery cover (Figure 2-2, A) anticlockwise to open it.

2. Insert the CR123A battery (B) into the battery compartment (C)

with the positive mark inward.

3. Turn the battery cover clockwise to tighten it.

In the OSD, the vertical battery icon

indicates the status of the

additional battery.

NOTE:

Remove the battery from the battery compartment if the device is

not used for a long time.

FIGURE 2-2. BATTERY INSTALLATION