User's Manual

17HORUS USER MANUAL
NOTE:
When captured, the image freezes for 1 second and a prompt shows
on the display.
For exporting captured videos and pictures, refer to Files Export.
2.1.12 FILE EXPORT
1. Unscrew the USB interface cover. Connect the thermal scope to
your PC with USB cable and open the detected disk.
2. Open computer disk and select the disk of device. Go to the DCIM
folder and find the folder named after the capture year and month.
For example, if you capture a picture or record a video on June
2021, go to DCIM -> 202106 to find the picture or video.
- Select and copy the videos to PC and play the file with the
player.
- Select and copy the snapshots to PC and view the files.
3. Disconnect the device from your PC.
NOTE:
• The device displays images when you connect it to PC. But
functions such as recording, capturing and hot spot are disabled.
• When you connect the device to PC for the first time, it installs the
drive program automatically.
You can also download files from the scope to your phone using the
AGM Vision app (see section 2.3).
2.1.15 INSTALLING THE HORUS ON A PICATINNY/
WEAVER RAIL WITH SCOPE RINGS
WARNING:
Always make sure your firearm is unloaded before you place the
scope on the firearm. Reconfirm that the chamber is empty if you
stop the procedure then resume later. Safe firearms handling rules
should be followed at all times.
You can mount the Horus scope on a Picatinny/Weaver rail of
weapon using pair of AGM scope rins (Figure 2-6).