User's Manual

25HORUS USER MANUAL
2.2.7 RETICLE
You can select a reticle in the current reticle group, and set
parameters such as type, color, and position for the reticle.
Select a reticle group first.
1. In the view mode, hold the wheel to show the menu.
2. Rotate the wheel to select
RETICLE menu item and press the
wheel button to enter the reticle setting interface.
3. Press the wheel button to select a Reticle No. You can select OFF
to disable the reticle.
4. Set reticle type:
1) In the reticle setting interface, rotate the wheel to select Type.
2) Press the wheel button to select a reticle type. 5 types of
reticles can be selected.
5. Set reticle color:
1) Rotate the wheel to select Color.
2) Press the wheel button to switch the color of the reticle.
6. (Optional) Repeat 3 to 6 to set color for other reticles in this group.
NOTE
When you switch the reticle number, a prompt will appear on the
interface. Select OK to save the parameters for the current reticle.
7. Hold the wheel button to exit the interface according to the
prompt:
– OK: Save the parameter and exit.
– Cancel: Exit and not save the parameter.
FIGURE 2-11. SET RETICLE