User's Manual

26 AGM Global Vision
NOTE
• There are 5 reticles can be configured in a reticle group.
• If the PIP function is enabled, the aimed target can be magnified
on the interface.
2.2.8 CORRECTING THE RETICLE
Correcting the reticle can help you aim at the target with high
accuracy by marking the offset between the big reticle and small
reticle.
Select a reticle group first.
1. In the view mode, hold the wheel button to show the menu.
2. Rotate the wheel to select
RETICLE menu item, and press the
wheel to enter the reticle setting interface.
3. Press the wheel button to select a Reticle No. you want to correct.
4. Set the distance to the target:
1) Rotate the wheel to select Distance.
2) Press the wheel button to select the number you want to
change.
3) Rotate the wheel to change the number.
5. (Optional) Rotate the wheel to select Freeze, and press the wheel
to enable the function.
NOTE
When enabling the freeze function in reticle, you can adjust the
position of the cursor on a frozen image. This function can prevent
image flutter.
FIGURE 2-12. CORRECTING THE RETICLE