User's Manual

28 AGM Global Vision
NOTE:
If you activate recoils continuously, the device will record the 7
seconds before the first recoil until the 7 seconds after the last
recoil.
2.2.10 AUTO POWER OFF
You can set the time for the automatic shutdown of the device as
required.
1. Hold the wheel button
to show the menu of device.
2. Rotate the wheel to select
AUTO POWER OFF menu item and
press
button to select OFF, 30 min or 45 min.
2.2.11 DISTANCE MEASUREMENT
You can detect the distance between the target and the observation
position by using the stadiametric rangefinder.
NOTE:
When measuring the distance, keep your hand and the position
steady. Otherwise, the accuracy may be affected.
1. Hold the wheel button
to show the menu.
2. Rotate the wheel to select
MEASURE menu item and press the
wheel to go to the setting interface.
3. Set the parameters for the target.
1) Rotate the wheel to select the target from Deer, Grey Wolf,
Brown Bear, and Custom.
2) Press and rotate the wheel the target height.
NOTE
The available height ranges from 0.1 m to 9.9 m.
3) Press the wheel button
to confirm.
4) Hold the wheel button
to save the settings and return to
the distance measurement interface.
4. Align the center of top mark with the edge of target top, and press
the wheel button to confirm.
5. Align the center of bottom mark with the edge of target bottom,
and press the wheel button to confirm.