User's Manual

31HORUS USER MANUAL

2.3 CLIENT SOFTWARE INTRODUCTION

We recommend using AGM Vision software. Search AGM Vision

software in App Store (iOS System) or Google Play

(Android

System). Install the client software on your mobile phone first, and

then connect your phone to the hotspot of the riflescope. Refer to

section 2.2.22 for details of hotspot connection.

NOTE:

The device password is set by user at first activation. If the

password was lost or forgotten, it can be reset. To make a reset,

provide the following action:

1. Hold

button to show the menu of device.

2. Move the cursor to

menu item and press the button to

restore all parameters to default settings.

1. Run the app and connect the phone or tablet with the device.

2. If the device is inactivated, set the password and activate it. If the

device is activated, enter the password to add it to the app.

3. When the device is added, the live view can be seen. You can view

the interface of the riflescope on the software. User can change

such image parameters as brightness, contrast, zoom, palettes

directly via phone or tablet as well as record video on phone/

tablet memory.

Device [Horus]

FIGURE 2-11. CLIENT SOFTWARE