User's Manual

32 AGM Global Vision
3 MAINTENANCE
3.1 MAINTENANCE
3.1.1 CLEANING PROCEDURES
1. Gently brush off any dirt from the body of the device using a clean,
soft cloth.
2. Moisten the cloth with fresh water and gently wipe down the
external surfaces (except lenses).
3. Dry any wet surfaces (except lenses) using another dry, clean,
soft cloth.
4. Using a lens brush, carefully remove all loose dirt from the lenses.
5. Dampen a cotton swab with ethanol and slowly, gently wipe down
the lenses. Clean the glass surfaces using circular movements,
starting from the center of the lens and moving out towards the
edge, without touching the lens holder. Change the cotton swab
after each circular stroke. Repeat this step until the glass
surfaces are clean.
6. Clean the accessories with a soft brush (or cloth) dampened with
soap and water.
3.1.2 PREPARING FOR EXTENDED STORAGE
CAUTION:
Thoroughly dry each item before placing them into the storage
case.
To prepare the riflescope for extended storage:
1. Clean the riflescope and accessories.
2. Place all items into the storage case.