User's Manual

33HORUS USER MANUAL
3.1.3 UPDATING THE DEVICE FIRMWARE
1. Download the firmware update package to your PC and unzip it.
2. Connect the thermal device to your PC with USB cable.
3. Turn on the thermal device.
4. Open the detected disk (USB drive) in file manager program. Copy
the unzipped .dav file and paste it to the root directory of the device.
5. Turn off the device.
6. Turn on the device. After a while, the firmware update process will
start automatically. During the update, the screen will display the
inscription “Upgrading ...”. The update process will be completed
when the inscription “Upgrading ...” goes out.
Repeat steps 4-6 for each updating file.
7. Turn off the device and disconnect it from your PC.
You can also enjoy automatic update function in AGM Vision.
3.2 TROUBLESHOOTING
Table 3-1 lists the most common malfunctions that may occur with
your equipment. Perform the tests, inspections, and corrective
actions in the order they appear in the table.
This table does not list all the malfunctions that may occur with your
device, or all of the tests, inspections, and corrective actions that
may be necessary to fix them. If the equipment malfunction is not
corrected by the suggested actions, or a problem occurs that is not
listed in this table, please contact AGM Global Vision’s Customer
Support center or your retailer.
TABLE 3-1. TROUBLESHOOTING
MALFUNCTION CORRECTIVE ACTION
The riflescope fails
to activate.
Charge the inner battery of the scope.
The image of the
riflescope is not
clear.
Perform the riflescope adjustment
referring to section 2.1.