User's Manual

User Manual of Handheld Thermal Binocular Camera

Model & battery bars

Standby mode

Unlighted

Power-saving mode

Press any button to activate it.

Err

Battery is damaged.

Blinking

Battery is being charged.

Chg.Finish

Battery is fully charged.

4. Complete battery charging and disassemble the battery.

2.3 Install Battery

Purpose:

Insert the batteries into the battery compartment.

Steps:

1. Rotate the battery cover anticlockwise to disassemble it.

2. Insert four batteries with positive/negative marks match with

that of the battery compartment

3. Align the shape of battery cover with that of the batteries and

cover the batteries.

4. Rotate the battery cover clockwise to fix it.

2.4 Power On/Off

When the binoculars is sufficiently charged, press the key to

power on the binoculars.

When the binoculars is running, hold the key for four seconds to

power off the binoculars.

 See the battery icon for the electricity quantity. means battery is fully

charged, and means that the battery runs low.

 When the Low power note shows, charge the battery.