Quick Start Guide Built to Endure Glory G1
Features of the product and its accessories described herein rely on the software, phone internal memory and local networks, and may not be activated or may be limited by local network operators or service providers. Therefore, the descriptions herein may not exactly match the purchased product or its accessories. The manufacturer reserves the rights to change or modify any information or specifications contained in this manual without prior notice or obligation.
BASIC DESCRIPTION 1. Ejector hole ---Metal PIN hole to open the SIM/SD tray. 2. SIM/SD tray ---Supports Nano SIM and Micro SD card. 3. USB Type-C and Rubber Cover ---USB Type-C connector. 4. Sensor ---Optical proximity sensor and Ambient light sensor. 5. Receiver ---Waterproof receiver. Do not touch with hard pin. 6. Camera key ---Long press to quickly activate the camera. Short press to take a photo or video when camera is on 7. Display ---5.7inch display. 8.
Useful tips: 1. In case the system stops working, press and hold down the power button until your device vibrates then release. 2. Do not cover Receiver, Main MIC and Sub MIC. 3. Adjust the volume to a comfortable level to prevent hearing damage. Waterproof warning: 1. AGM A10 is IP68 certified. 2. USB rubber cover and SIM tray must be completely closed to prevent water damage 3. If the phone does come in to contact with water, it may affect the audio for a short period.
4. Place Nano-SIM or Micro SD card in outside position. 5. Make sure that the Nano-SIM and Micro SD card metal contact parts are facing down and that the cut corner aligned with tray in the correct position as per the diagram shown above. SIM Tips: 1. The AGM A10 does not support 2 SIM cards data services working together. When inserting 2 SIM cards, you can only choose one of the 2 SIM cards to use 4G services. The AGM A10 supports dual SIM dual standby but single pass.
in the box. AGM A10 supports CE/CB/FCC/CCC/EAC or equivalent certified chargers. The recommended charger output is 5V A. Uncertified equipment may cause damage to the device or cause batteries to explode. 3. Open the USB Type-C port cover and connect the USB power cable to the port. Be careful not to use excessive force when plugging the cable. Any damage caused by attempting to insert the connector incorrectly is not covered by the warranty. 4. Plug the charger into an AC mains socket. 5.
Making a call: 1. Touch the phone icon on home screen. 2. Open dial pad and input phone number. 3. Touch the call record icon to check call records. 4. Touch contact icon to check contact menu. Sending an SMS: 1. Touch the message icon on home screen. 2. Create a new message. 3. At the top of the screen, enter a phone number or select a contact. Type your message, then send. Send an email: 1. Touch the Email icon on the Home or All Apps screen. 2.
FUNCTIONS SHORTCUT MENU 1. Pull down from status bar and open notification panel. 2. Press the shortcut icon to activate/ de-activate the functions. ADDITIONAL FUNCTIONS *App White List To save energy, parts of AGM smartphones support application white list function. By enabling function, applications will be closed automatically when the screen is off. To disable this function, please open the App White List and turn off the auto cleanup switch.
FCC RF EXPOSURE INFORMATION: WARNING!! Read this information before using your phone In August 1986 the Federal Communications Commission (FCC) of the United States with its action in Report and Outer FCC 96-326 adopted an updated safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.