User Manual

5
5) SERVICE
Have your power tool serviced by a qualified repair person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
Symbols used in this manual
IMPORTANT: Some of the following symbols may be used on your tool. Please study them and learn
their meaning. Proper interpretation of these symbols will allow you to operate the tool better and
safer.
Terminology used in the manual
1. Warning: This term means that there is a risk of physical harm or death to the operator or people nearby.
2. Caution: This term means that there is a risk of damage to the machine, cutting tool or other equipment.
3. Note: These terms offer useful information relating to the operation of the machine or its maintenance.
Symbol Name Designation/Explanation
V Volt Voltage (potential)
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
kg Kilograms Weight
min Minutes Time
s Seconds Time
ø Diameter Size of drill bits
n
0
No load speed Rotational speed, at no load
min
-1
Revolutions per minute Revolutions, strokes, surface speed per minute.
0 Off position Zero speed, zero torque…
1, 2, 3, … Selector settings Speed setting,higher number means greater
speed
~ Alternating current Type or a characteristic or current
Class I construction With electrical earth
Warning symbol Alerts user to warning messages