User Manual

5
4 SPEED VARIABLE MOTOR SPEED MODELS
Magnet base
Coolant tank
Motor switch
Magnet switch
Coolant feed tap
Reversing switch
Spindle
Annular cutter
(Not included)
Gear selector
Ejector port
Pilot pin
(Not included)
1-1/4 " (32.7mm) Weldon shank
annular cutter arbor
MT3 Twist drill bit
(Not included)
MT3 Tapping adaptor and
Tapping unit
(Not included)
MT3 Chuck adaptor
and Chuck
(Not included)
Standard Accessories
* Wrench M8
* Hex. Key M2.5 & M5
* Chip Guard kit
* Coolant Tank kit
* Safety Chain
* Drift
Power Input 1700W (110V), 2000W(220V)
Voltage See machine nameplate
Speed 1 35 - 120
No Load / Full Load min
-1
Speed 2 70 - 220
Speed 3 80 - 250
Speed 4 140 - 450
Dia. X Depth of cut with Annular Cutters 120mm x 50mm (4-3/4" x 2")
Max. Capacity
Dia. X Depth of MT3 Twist Drill Bit 32mm x 150mm ( 1-1/4" x 6" )
Dia. X Depth of MT3 Chuck adaptor with Twist Drill bit 16mm x 110mm (5/8" x 4-5/16")
Dia. X Depth of Taps 25.4mm x 40mm (1" x 1-9/16")
Magnetic Adhesion 32,000 N
Overload Protection Standard
Net weight 27kg (59.4Lbs)
Variable Speed Wheel
* Max. Dia. x Depth of cut with Annular Cutters with 19mm Weldon or
Quick-Release Arbor: 60mm x 50mm ( 2-3/8" x 2")