User Manual

6
WARNING! Read and understand all instruction before operating any drilling system. Failure to
follow all instructions listed below may result in electrical shock, damage to drilling system and even
personal injury.
GENERAL SAFETY INSTRUCTIONS
WORK AREA
Keep your working area clean and well lighted. Cluttered benches and working stations causes accidents as
well as dark spaces. Always ensure working stations are clean and well lit.
Do not operate power tools in explosive atmosphere, such as in the presence of flammable liquids,
gases or extreme dust. Power tools create sparks that may ignite gases as well as flammable liquids.
Dust may enter the ventilation system causing clogging and causing overheating.
Keep bystanders, children and visitors away from moving parts of the power tool. Any distractions can
cause you to loose control of the power tool and an injury could take place.
ELECTRICAL SAFETY
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all
codes and ordinances. Never remove the ground prong or modify the dance plug in any way. Do not use
any adaptor plugs. Check with a qualified electrician if you are in doubt as to whether the outlet is
properly grounded. If tools should electrically malfunction or break down, grounding provides a low
resistance path to carry electricity away from the user.
Never carry a tool by the cord or hose and “yanking” the cord or the hose to disconnect it from the
receptacle. Always carry the power tools properly and store in dry and dust free place.
Keep cords and hoses away from heat, oil and sharp edges. Damaged cords increase the risk of electric
shock.
Don’t expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of
electric shock.
When operating a power tool outside, use an outdoor extension cord marked .W-A. or. W.. These cords
are rated for outdoor use and reduce the risk of electric shock.
PERSONAL SAFETY
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use
tool while tired or under the influence of drugs, alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and
gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is off before plugging in. Carrying tools with your finger on the
switch or plugging in tools that have the switch on invites accidents.
Remove adjusting keys or switches before turning the tool on. A wrench or a key that is left attached to a
rotating part of the tool may result in personal injury.
Do not overreach. Keep a proper footing and balance at all times. Proper footing and balance enables