Original instructions Original instructions For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
FUNCTIONAL DESCRIPTION Motor unit Switch Strap Handle Handle support handle (Optional) Switch Motor unit support handle (Optional) Vibrator shaft Vibrator head Vibrator shaft Vibrator head Ø39mm Models Voltage Power output No load min-1 Vibration rate Net weight (motor head only) 30mm Models Ø39mm Model See machine nameplate 1200W/8.4A (220-240V), 760W /13.9A (110-120V) 16,000 11,000 b/min 4.2kg (9.26 Lbs) 2 Fig.1 Ø30mm Model 330W/3A (220-240V), 330W/5.
GENERAL SAFETY INSTRUCTIONS e. WARNING! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term “power tool” in the warnings refers to your mainsoperated (corded) power tool or battery-operated (cordless) power tool. f. 3) PERSONAL SAFETY 1) WORK AREA SAFETY a. b. c. a. Keep work area clean and well lit.
5) SERVICE ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. 4) POWER TOOL USE AND CARE a. b. c. d. e. f. g. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
SPECIFIC SAFETY RULES UNPACKING DO NOT let comfort or familiarity with the Carefully remove the tool and all loose items from product (gained from repeated use) replace strict the shipping container. adherence to concrete vibrator safety rules. If you Retain all packing materials until after you have use this tool unsafely or incorrectly, you can inspected and satisfactorily operated the machine. suffer serious personal injury. CARTON CONTENTS 1.
ASSEMBLY – Mounting the support handle (optional) Lock button & Trigger switch For an even more comfortable operation, a support handle is provided. The support handle is fitted where the Vibrator Shaft is connected to the Gear Case (motor unit). 1. Loosen the support handle. 2. VR600 models: mount the clamp to the nose Lock button & Trigger switch of the gearcase.
Effective leveling and removal of air bubbles KEEP TOOL CLEAN IMMEDIATE AFTER USE: Removal of the air bubbles is complete after you have worked the tool throughout each effective Rinse off all wet concrete from the shaft and vibrator range, the concrete stops shrinking, and the mortar unit before it dries. has risen evenly to the surface, giving off a light appearance. Gently remove the operating tool to WARNING: Double check to ensure that the avoid leaving holes.
THE CARBON BRUSHES STANDARD ACCESSORIES The carbon brushes are a normal wearing part and Support Strap (VRN1400 only) must be replaced when they reach their wear limit. If the replacement of the power supply cord is necessary, this has to be done by the manufacturer or their agent in order to avoid a safety hazard. WARNING: All repairs must be entrusted to an authorized service center. Incorrectly performed repairs could lead to injury or death.
Ø38mm Model WIRING 10
Ø28mm Model WIRING 11
01 02 29 08 05 03 12 09.1 110V 09.2 230V 10 04 31 24 17 16 15 11 12 13.1 110V 13.0 230V 28 14 15 16 17 22 19 230V/110V 25 23 20 18.1 110V 18.0 230V 26 32 33 27 21.5 230V AUS 21.4 110V USA 21.3 230V CH 21.2 230V UK 21.1 110V UK 21.
Ø38mm Model PARTS LIST Item No. Parts Name Q'TY 1 VIBRATOR SHAFT 2 COUPLING 1 3 CAP SCREW M5 x 25 4 4 FLAT WASHER M5 4 5 GEAR CASE 1 6 N/A - 7 N/A - 8 BEARING 6202-2RS 1 9 ARMATURE M10 x1.
01 27 02 26 03 28 10 06 29 04 30 05 07 08 09 14 11 14 13 NO.01~31 V1.
Ø28mm Model PARTS LIST Item No.
