User Manual

2. Connections
Connection instruction:
1) Connect TX HDMI input with source device HDMI output.Connect TX HDMI output with HDTV HDMI input.
2) Connect TX CAT6 with RX CAT6.
3) Connect RX HDMI output with HDTV HDMI input.
4) Power on the device and it works.
五、FAQ
Q: No image output or audio and video display is not normal?
A: 1)Adjust RX “RESET” button to reset the device.
2)Try shorter network cable to reconnect.
Q: RX “LINK” led is flashing all the time?
A: 1)Make sure network cable connection follows the standard of IEEE- 568B.
2)Check whether TX has HDMI signal input.
3)Reset TX&RX and reconnect.
Q: RX “LINK” led lights on all the time but no image output?