Lawn Sweeper Owner's Manual

6
5/16" x 1-1/2"
CARRIAGE BOLT (C)
5/16" NYLOCK NUT (J)
5. Cutofftheplastictiethatholdstheheightadjustment
tubeinplace.
6. (Figure 4)AssembletheR.H.hitchtubetothesweeper
housingusingtwo5/16"x1-1/2"carriagebolts(C),and
two5/16"nylocknuts(J).Do not tighten yet. Repeat
fortheL.H.hitchtube.
7. (Figure 5)Fastenthehitchtubestogetherusingtwo
5/16"x2-1/2"hexbolts(A)and5/16"nylocknuts(J).
Do not tighten yet.
5
5/16" x 2-1/2"
HEX BOLT (A)
5/16"
NYLOCK NUT (J)
3. (Figure 3)Attachthebrushassemblywiththeblack
brushretainertotheleftendofthebrushshaftusing
two1/4"x1"hexbolts(G)and1/4"nylocknuts(I).The
brushretainermarkedwithblackinkmustbeplacedto
themiddleofthesweeper.
4. (Figure 3)Turna wheel to rotatethe brushes. (The
wheelsdrivethe brushesin one direction only.)The
overlapbristlesshouldbeonthebacksideofthebrush
as it rotates.
3
1/4" x 1"
HEX BOLT (G)
1/4" NYLOCK NUT (I)
BRUSH RETAINER
MARKED BLACK
ENGLISH
4