Lawn Sweeper Owner's Manual

8
14. (Figure 10) Place the star washer (L) between the
heightadjustmenthandleandtheheightadjustmenet
strap. Insertthe 5/16"x 1" carriage bolt (F) through
theheightadjustmenthandle,thestarwasherandthe
heightadjustmentstrap.Assemblea5/16"atwasher
(K)andtheplasticknob(X)ontotheendofthebolt.
ASSEMBLY OF HOPPER BAG
1. (Figure 11)Turnarearhoppertubesothatthebrace
holesinthemiddleofthetubeface down.Slidethe
tubethroughthetwoloopssewntothetoprearseam
insidethehopperbag.
2. (Figure 12) Insert the two upper hopper side tubes
throughthestitchedapsoneachsideofthehopper
bag.
3. (Figure 12)Assembletheendsoftherearhoppertube
ontotheendsoftheupperhoppersidetubes.Fasten
togetherusingplasticplugs(Z).
UPPER HOPPER
SIDE TUBE
PLASTIC PLUG (Z)
REAR HOPPER TUBE
(brace holes on bottom)
INNER BAG LOOPS
10
11
12
ENGLISH
5/16" FLAT
WASHER (K)
5/16" x 1"
CARRIAGE BOLT (F)
PLASTIC KNOB (X)
STAR WASHER (L)
(between strap and handle)