Farmer’s Buyers Guide SPRING 2012 www.westwardparts.com RED DEER • REGINA • WINNIPEG Prices in effect until June 15, 2012 NEWM ITE Agri-Hopper •• •• •• •• WMade in Canada HOP AH-8 HOP AH-10 HOP AH-13 UV resistant. Bright colors for night/low light. Easy and complete clean out design Will not sag or droop.
Make your yard the best ever! 6' Heavy Duty Landscape Rake ATV Flip Over Harrow •• •• •• •• •• 5 foot width 42 spike teeth Adjustable spike angle Staggered tooth pattern Seven forward, seven rear • angle adjustments provides for • precision leveling and grading. Includes parking stand. Sturdy frame construction • with heavy duty• 5/16" x 1" x 16" tines.
ATV Flip–Over Disc NEWM ITE •• Steel Wheel Barrow •• •• •• •• •• •• Capacity: 6 cf, 163 kg (359 lbs.) Tire: 15" x 3.5" 25" height, 26.5 width, 58" length. Red. Weight: 18 kg (39 lbs.) Steel hopper, wood handles. WSS WB6601 6800 $ each plus GST •• Capacity: 7 cf, 150 kg (330 lbs.) Tire: 15" x 3.5" 29" height, 27 width, 60" length. Black. Weight: 17 kg (37 lbs.) Plastic hopper, steel handles. •• •• •• NEWM ITE •• WSS WB7801 $ 6400 each plus GST •• •• •• •• 18" diameter x 24" wide.
Nourish your lawn with a spray of savings! NEWM ITE WMade in Canada WP Pull Type Sprayer WP 150 Gallon Pull Type Sprayer •• •• •• •• •• •• •• •• WMade in Canada 150 US gallon tank with optional WP150T trailer• & WP21150FT boom assembly. Handgun hose holder. 3/8" x 25' handgun hose. 5" x 8" bottom sump for complete tank drainage. 5 HP Honda engine. Pressure gauge. 21 foot, 3 section boom w/13 Combo–Jet nozzles. 14" rims w/o tires.
WP 25 Gallon Pull Type Sprayer •• •• •• •• WP 20 Gallon Pull Type Sprayer WMade in Canada 25 US gallon tank with 40" boom & molded• handgun hose holder & heavy–duty • boom support. SHURflo 12 volt 60 PSI pump with internal • bypass, fuse holder and on–off switch. 7.2 amp draw at 60 PSI 80" coverage. •• 20 US gallon tank with wrap around saddle support. •• •• SHURflo 12 volt 60 PSI pump with internal • bypass, fuse holder and on–off switch. 7.2 amp draw at 60 PSI 140" coverage. Dripless nozzles.
Hypro, Delavan Ace & SHURflo Pumps Centrifugal Pumps Pressure Gauges •• Measure PSI performance. Roller Pumps 2½" Gauge •• •• ¼" MIPT, 0–100 PSI SPP 70001 5 roller, cast iron, output to 46.5 gpm, • pressure to 200 PSI 32126 $ 695 $ each plus GST SPP 75009 each plus GST ER LOW CE R P I •• •• •• •• •• SPP 70207 20 GPM at 100 PSI The 206 motor requires 7 GPM hydraulic fluid • input and fits virtually all tractor hydraulic systems.
Partial Listing of Nozzles and Strainers Quick Nozzle Assembly •• •• •• Wet boom split eyelet diaphragm assembly. QJ17560A-3/4-NYB $ 96 For ¾" pipe. each plus GST 3 Quick Nozzle Assembly •• •• •• •• 7 •• •• 96 •• •• Wet boom 3 outlet diaphragm assembly. Positive shut–off between • each spray pattern. For 1" pipe.
Sprayer Accessories TIPS TIPS Turbo TeeJet – Wide angle flat spray tips! AI TeeJet – Air induction spray tips! Tapered edge wide angle flat spray pattern • for uniform coverage in broadcast spraying Stainless steel insert produces tapered edge flat spray• pattern for uniform coverage in broadcast spraying Large rounded internal passage to • minimize clogging Polymer insert holder and pre-orifice with VisiFlo® color-coding Larger droplets for less drifts Excellent resistance to corrosive solutions Sup
Turbodrop XL Venturi Nozzles Shutoff Valve 12V Diaphragm Pump •• By–pass pump. •• 1.4 gpm, 45 PSI internal by–pass. •• 3/8" NPT – Female ports. •• Lower water usage! •• Wide drift control range: 30–90 PSI• Wide pressure range: 20–120 PSI •• 12 Volt electric boom shutoff valve. •• 1" NPT female inlet. SPP 70281 •• Patented stabilization chamber. •• 1" male bypass outlet. •• ¾" NPT female boom • line outlet. •• Wide variety of applications. •• For high volume applications at • minimum pressure loss.
Our products make a day in the field productive! Chemical Injector The Handler II Centerline Guidance System •• •• •• Guidance modes: headline mode, parallel• and curved AB line, adaptive curve.
WP 3 Point Bale Handler WP S-Tine Cultivators • • • • • 2 x 2 all welded box frame. Sweep options available. Category I – 3 pt. hitch Complete with points. 5', 6', 7' or 8'1" sizes. •• •• •• HAY BH1 Easily handles large round bales. The Westward BH1 easily handles large round • bales weighing up to 2,000 lbs. with diameters from 4' to 6', three point hitch mounted. Length 68", Width 71", Height 27" , Weight 310 lb. 1,290 $ 00 each plus GST Part No. Size Price GMR CDT5 5 feet 575.
Handy to have around the workshop! HID Work Lamps •• •• •• •• •• Gives out 3 to 4 times brighter light than halogen! HID sealed beam. 12V ballast. Gives out white light. Lamp dimensions: 7½" L x 6" H x 5" D NEWM ITE WP Flat Free Tires •• •• •• •• Install it and forget it! Foam filled, never goes flat. Retains pneumatic-like • feel, not hard as a rock. Standard sizing 4.
3" Water Pump 2" Water Pump •• 3" centrifugal pump. WSS SEV80B •• Maximum capacity • 277 GPM • $ 00 (1,048 l/min.) •• Maximum head 82 ft. • each plus GST (25 m) maximum • suction 26 ft (7.9 m) •• Recoil start, • 6 HP Koshin engine. •• Fuel capacity 0.95 gallons (3.6 l) •• 1.6 hours run time, 1 year warranty. •• •• •• •• •• •• 596 2" Centrifugal pump. Maximum capacity 164 GPM (620 l/min.) Maximum head 82 ft. (25 m) Maximum suction 26 ft. (7.9 m) Recoil start. $ 00 Fuel capacity • 0.95 gallons (3.
Special Spring Sale Prices on Tools! SALE 5 Piece Heavy Duty Plier Set •• Includes 10" groove joint, 8" linesman, 8" slip-joint, 7" side cutter and 6" long nose. •• Forged chrome nickel with storage tray. 25 Piece Combination SAE & Metric Hex Key Wrench Set •• Manufactured from Chrome-Molybdenum for strength and durability. 1 5 3 7 1 9 5 3 7 1 5 3 •• Contains ⁄16", ⁄64", ⁄32", ⁄64", ⁄8", ⁄64", ⁄32", ⁄16", ⁄32", ⁄4", ⁄16", ⁄8", 1.5 mm, 2 mm, 2.5 mm, 3 mm, 4 mm, 4.5 mm, 5 mm, 5.
Idler Pulleys ACC 110 Tractor Seat •• Protective zinc plating. •• Noiseless, precision ball bearings. Part No. V-Belt Flat Belt Description Price PTP 55950 3" O.D., 1/2" bore 19.10 PTP 55957 5" O.D., 5/8" bore 26.26 PTP 55960 2- 3/4" O.D. 5/8" bore 18.83 PTP 55965 6" O.D., 1/2" bore 35.48 Weld-on Sprockets & Hubs Partial Listing •• •• •• •• Makes repairs more affordable. High quality steel. Black oxide finish. Sprocket I.D. has machined bore for tight fits • when welding.
We've got the tools to suit your needs! Partial Listing • of Hydraulic Cylinders Air Hose Assemblies Partial Listing Only Partial Listing • of TX Hydraulic Cylinders Hydraulic Cylinders TX Series Hydraulic Cylinders •• Value engineered. •• 2500 PSI working pressure. •• Weight reduced compared to standard cylinders with the same strength. 2" bore x 8" stroke• HYD 648518 116 $ 93 each plus GST 3" bore x 8" stroke• HYD 648520 $ 4" bore x 8" stroke• HYD 661089 $ 12872 •• •• Tie Rod Style.
A full load of great products! NEWM ITE GMR 45-0175 Poly Explorer Cart GMR 45-0350 Tandem-Axle Dump Cart • Steel bed with scratch-resistant, powder-coated paint finish for longer product life • • 1,000 lb. load capacity for really big loads Four-wheel, two axle design for better balanced loads Tube rails add height and improve load stability. Extra-large, 18" x 9.
At these prices you'll be sitting pretty! Stir things up with our great prices on Standard Features - RTF Models rototillers! Garden Tractor Seat •• Steel pan with • trimmed edge. Vinyl covered • molded cushions. Drain hole and • contoured for • air–flow. Safety switch cavity. •• •• •• ACC 135 9258 •• •• •• •• •• •• •• $ each plus GST Garden Tractor Seat •• Integral polyurethane• /steel frame • construction. Waterproof. Universal mount. Safety switch cavity.
Clean things up! Round Back Rotary Cutters •• •• •• •• •• •• •• •• •• •• •• Category I - 3 point hitch! 4', 5' or 6' Features formed • sheet metal • decking with • NEWM cross bracing • ITE at front, rear • and midsection. Floating hitch follows contour of terrain. 20" diameter stump jumper. ½" x 3" forged, • Part No. heat treated blades. 16" diameter solid • GMR TC10-400R rubber tail wheel. 10 gauge formed deck. GMR TC10-500R 40 HP gearbox. GMR TC10-600R Category 4 driveline.
Connect to great savings with Pioneer's products! Dust Plugs •• Hydraulic Clamps •• Partial Listing of Poppet Style Male Tips Poppet Style Male Tips PVC, Metal & Rubber •• HYD 5006-4 Double breakaway clamp • for couplings with 1½" diameter sleeve. 1679 $ each plus GST HYD 5205-4M HYD 5005-4 HYD 5205-4 Part No. Description HYD 5205-4M For use with all ½" couplings. PVC – 1 piece 2.69 HYD 5005-4 For use with all ½" couplings. Metal 6.91 For use with all ½" couplings. Rubber w/chain 4.
Get your driveline running smoothly! PTO 1000606 Partial Listing of PTO items PTO Adapters PTO Parts – Driveline Parts •• •• •• Quick release type Part No. Size Price PTO 15865 21 spline 13⁄8" female x 6 spline, 13⁄8" male 68.74 PTO 4900 ⁄8" round female with keyway and grub screw x 13⁄8" 6 spline quick release 99.20 PTO 4901 1" round female with keyway and grub screw x 13⁄8" 6 spline quick release 100.
CTD Standard Hubs No. of Bolts Hub Series Pilot Diameter Bolt Circle Diameter 4 HUB H400 3.62 5.00 5 HUB H500 4.00 5.50 $ 6 HUB H600 4.62 6.00 each plus GST 8 HUB H800 6.00 8.00 To fit a variety of makes! Hubs are supplied with cups – bearings extra. Hubs are supplied with grease zerk pressed in. Hub capacities are based on 20,000 mile LB10 bearing life at tractor speed (20 mph) and 14,000 PSI maximum fiber stress on the spindle in the rear bearings and seal area! • • • No.
Bearings & Seals Ball Bearings WP Bearings & Seals Part No. Our own brand! BEI 6203-2RS Sealed ball bearings, electric motor bearings, swather roller bearings, flange bearings, needle bearings, agricultural bearing inserts, bearing • housings, flangettes, discer bearings, bronze bushings, taper roller bearings, tapered sealed cones, trailer and automotive wheel bearings, o-rings and much more!• Flanged Light Duty Bearings •• Light duty bearings! Inserts Part No. Price Each BEI ASF100-2 4.
Chains of every sort and size! Roller Chain Tools Steel Detachable Chain •• •• •• Chain breaker. •• •• CHA A8050 AGRI-TUFF Roller Chain High grade steel. Operating at moderate loads and speeds, this chain will provide long service life on drive and conveyer • applications. Links are special high-grade steel precision formed for pitch uniformity. Available in sizes 25, 32, 42, 51, 52, 55, • 62, 62H, 67H.
Mufflers and Accessories Mufflers Rain Caps •• We carry a variety of makes! •• A collection of sizes • for exhaust rain caps! Part No. Description Price Each MUF AC20 For Allis Chalmers models 7000 (Serial #8553 & up), 7010, 7020, 7030, 7040, 7045, 7050 & 7060 (all Diesel 1979-81) 113.
A line up of savings for your workshop shelves! Tech-Steel •• •• •• HC12A Refrigerant Can Tech-Plastic Steel hard in 15 minutes. Full cure in 1 hour. Permanently adheres to many substances. •• •• •• LUB 16002 •• ACC HC12A-6 895 879 $ $ $ each plus GST each plus GST each plus GST Motor Assembly Grease •• The environmental alternative! Safe to use. HC12a is designed as a drop–in • replacement for ozone–depleting • CFC R12 and global warming • HFC R134a® refrigerant.
Slow Moving Signs LED Warning Light •• •• Mount them on your equipment! 15 $ ACC 101105 Sign on Metal 07 each plus GST 1053 $ ACC 101303 Decal Only each plus GST 16 $ ACC 101600 Sign on Plastic •• •• •• •• •• •• •• LIG E420AM Prairie clean! Environmentally responsible! Loosen rusted and seized nut • and bolts. Excellent lubricator • and rust remover. 100% canola based. 313 g. aerosol.
Jacks of every kind! ® Partial Listing of Jacks Agricultural Jacks HammerBlow Jacks •• •• •• •• •• •• Screw type 5,000 lb. capacity! Outer tube is engineered to handle • both vertical and side loads with ease. Inner screw features rolled Acme Threads • providing long life and low handle effort. Nearly a half–century of proven, dependable • service in the field.\ Reduced handle effort achieved through use • of alloy nuts and thrust bearings.
Baler Belting Partial Listing of Baler Belting Baler Belt Sets Partial Listing of Baler Belt Sets •• •• Fits John Deere model 510 (upper) 4" x 484" •• Complete belt sets of OEM quality• diamond top 3 ply belting to fit your John Deere 530, 535, 566, 577 balers.
Make harvest go smoothly! Forged Steel Guards •• Plated Section Rivets •• Oval head or countersunk head available! Part No. Description CUT 01008 OH ½" x 5½ mm 10.08 CUT 01014 OH 9/16" x 5½ mm 8.34 Price Bolt–A–Sections •• •• Sections can be changed in a quarter • or less time required with rivets. Special bolts give 30% more clamp load • than rivets and are positive locking. Part No. Description Price CUT 01100 (TJS5BN) 5/8" long 22.56/100 (23¢ ea) CUT 01101 (TJ85BN) 1" long 8.
® •• V-Belts Tough fibre tensile cords are bonded to the rubber• compounds and safeguard the belt from failures Protective covering resists wear and provides • a high coefficient of friction for efficient power transmission between belts and sheaves Superior length stability due to exceptional • material and manufacturing processes, • matched sets of TQP provide high performance Static safety is built into each belt by using • conductive material; it means safer drives under hazardous conditions Oil and
WP Quick Calibrator Renew–A–Shine •• •• Restore the lustre to your • faded equipment. 340 g. aerosol. GMR 45-0362 LUB 2001 ATV Rough Cut Mower •• •• •• •• •• •• 2088 SALE $ each plus GST 42" cutting width. 12.5 HP Briggs Power Built™ AVS engine. Tough enough to handle brush up to 2" Offsets up to 23" left or right. Adjustable deck height – 1.5 to 5" Electric start.
