Specifications
26 |Spring Farmer's Buyers Guide
A line up of savings
for your workshop shelves!
$
8
79
each plus GST
LUB 16002
• Steel hard in minutes.
• Full cure in hour.
• Permanently adheres to
many substances.
Tech-Steel
$
8
79
each plus GST
LUB 2900
• Begins to harden in
- minutes.
• Mold it to any shape.
• Can be drilled, sawed,
sanded, painted.
Tech-Plastic
$
8
95
each plus GST
HC12A Refrigerant Can
• The environmental alternative!
• Safe to use.
• HCa is designed as a drop–in
replacement for ozone–depleting
CFC R and global warming
HFC Ra® refrigerant.
ACC HC12A-6
$
8
95
each plus GST
LUB 03494
$
36
57
kit plus GST
Air Conditioning
Refrigerant Recharge Kit
• Everything you need to recharge and seal
your system.
• of oz. can HC
• Non-ozone depleting
• Non-corrosive.
• Non-toxic.
• Charging hose
with gauge.
ACC 45885
$
18
26
lb. bottle plus GST
Hand Cleaner
• Eective, safe, and
environmentally
friendly!
• First hand cleaner certied to use
the internationally recognized
EcoLogo (Environmental Choice)
and Green Seal symbols.
LUB 11-1100
$
10
93
each plus GST
Odorstop
• Eco friendly! No CFCs!
• Designed to tackle accumulation in
vehicle vent and A/C systems.
• Excellent for eliminating odors
caused by cigarette smoke, mildew
and mold by attacking the problem
at the source, circulating throughout
the entire system.
• One time use (total release).
ACC 44210
$
17
73
each plus GST
Chain & Cable Fluid
• Lubricate your chains/cables!
• Aerosol.
• oz. can.
LUB 13563
$
17
90
each plus GST
Fluid Film
• Environmentally friendly!
• g. aerosol.
LUB 3300
$
22
98
$
10
07
each plus GST
each plus GST
Renew–A–Shine
• Restore the lustre to your
faded equipment.
• g. aerosol.
High Temperature
Grease
• Non–melt type!
• Workable from
°F/°C to °F/°C
and up to °F/°C
for short intervals.
• oz. cartridge.
LUB 2001
LUB 16198
$
9
34
each plus GST
Low Temp
Grease Cartridge
• For low temperature applications
down to -°F/-°C
• Water resistant.
• oz. cartridge.
LUB 17298
Motor Assembly Grease
• oz. tube.
• A smooth, light bodied grease
made especially for motor
assembly, prevents “dry start”.
• Provides lubrication during the
initial start-up before the motor oil
has circulated.
• Protects freshly machined engine
parts from rust and corrosion.