Specifications
6 |Spring Farmer's Buyers Guide
Hypro, Delavan
Ace & SHURflo Pumps
Centrifugal Pumps
• 20 GPM at 100 PSI
• The 206 motor requires 7 GPM hydraulic uid
input and ts virtually all tractor hydraulic systems.
• Recommended for: John Deere type pressure
compensating closed centre systems, Case-IH
type load sensing closed centre systems. Open
centre systems with capacities from 7 to 16 CCW
• 150 Series High Performance.
• 1½" x 1¼" CCW.
Centrifugal Pumps
• The 210 motor requires 10 GPM (37.9 LPM)
maximum hydraulic uid input.
• Recommended for: Load sensing closed
center systems.
• Open center systems up to 17 GPM (64.4 LPM)
using internal needle valve bypass.
• 1¼" suction x 1" discharge.
• Maximum 180 GPM at 10 PSI, 20 GPM at 90 PSI
12V Diaphragm Pump
• By–pass pump w/electric package.
• 1.4 gpm, 60 PSI internal by
–
pass with built
–
in
on/o switch.
• ⁄" NPT – Female ports.
$
928
01
each plus GST
$
1,092
58
each plus GST
$
133
46
each plus GST
SPP 70284
SPP 70203 (FMC-HYD-210)
SPP 70207
Roller Pumps
• 5 roller, cast iron, output to 46.5 gpm,
pressure to 200 PSI
• 6 roller, cast iron,
output to 19.5 gpm,
pressure to 300 PSI
• Also available
in reverse rotation,
Ni-resist, or Diamond Series.
• 7 roller, cast iron,
output to 22.5 gpm,
pressure to 200 PSI
• Also available
in reverse rotation,
Ni-resist, or Diamond Series
• Centrifugal Pump.
• Maximum ow 140 gpm.
• Maximum pressure 180 PSI
• 1½" inlet x 1¼" outlet CCW
• Maximum speed 6,000 rpm.
• Pedestal mount can be used
for direct or belt drive.
$
321
26
each plus GST
$
152
83
each plus GST
$
227
40
each plus GST
$
436
35
each plus GST
SPP 70001
SPP 70067
SPP 70006
SPP 70004
2½" Gauge
• ¼" MIPT, – PSI
2½" Gauge
• Glycerin lled, ¼" MIPT, – PSI
Model 7560C
• roller cast iron pump, also available
in Ni-Resist or Silver Series housing
• Maximum ow: . gpm/. l/min. at , rpm
• Maximum pressure: PSI/. BAR
• Maximum rated speed: , rpm
• Maximum uid temperature: °F/°C
• Shaft: ⁄" solid, Port sizes, ¾ NPT
Model 9303C
• Mounting almost anywhere
on tractor or sprayer, Series C
becomes part of the vehicle's hydraulic
system and frees the PTO for other uses.
• Max. pressure PSI, max. ow GPM
• Pump construction: Epoxy–coated cast iron
housing, nylon impeller, two needle main bearings
and an outboard, double sealed factory–lubricated
ball bearing.
• Viton sealing element standard.
Pressure Gauges
• Measure PSI performance.
$
17
95
each plus GST
$
6
95
each plus GST
$
236
11
each plus GST
$
956
53
each plus GST
SPP 75009
SPP 75021
SPP 70053
SPP 70223
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE
LOWER
PRICE