User Manual

4
tOOLS REQUiRED FOR ASSEMBLy
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrench
(2) 9/16" Wrenches
FiGURE 1
7
G
5
A
F
1. Poly Tray
2. Wheel Support
3. Latch Stand Plate
7. Foot Pedal Latch
8. Hitch Bracket
9. Axle
4. Latch Stand Bracket
5. Draw Bar Tongue
6. Wheels (2)
1
2
3
5
7
4
8
9
6
CARtON CONtENtS
ASSEMBLy
StEP 1: (SEE FiGURE 1)
• Verify that all parts and all fasteners on pages 3 and
4 are included in the carton and parts bag. Refer
to page 3 to identify fasteners used in the following
instructions.
• Place the foot pedal latch (7) through the slot in the
tongue (5). Assemble the hex bolt (A) through the
tongue, the lever, and two (SEMS) hex nuts (G)
placed on each side of the lever. Assemble the nylock
nut (F) onto the end of the hex bolt (A) and tighten
so that the hex bolt (A) can still rotate freely. Tighten
the two (SEMS) hex nuts (G) against each side of the
foot pedal latch (7) so that it is centered in the slot.