User Manual

8
CAUtiON: VEHiCLE BRAKiNG AND
StABiLity MAy BE AFFECtED WitH
tHE ADDitiON OF AN ACCESSORy
OR AN AttACHMENt. BE AWARE OF
CHANGiNG CONDitiONS ON SLOPES.
1. At the beginning of each season, using a light
machine oil, lubricate the latch, the latch pivot bolt,
and the area of the axle where the draw bar tongue
pivots.
2. Grease or oil the wheel bearings periodically. Use
automotive wheel bearing type grease or 20 weight
oil.
3. Check periodically for loose bolts.
4. Keep tires lled to the recommended tire pressure
printed on the tire.
1. Refer to the vehicle owners manual for instructions on
safe operation on slopes.
2. Use the slope guide provided on page 9 of this
manual to determine whether slope angle is too steep
for safe operation.
3. For best handling and traction, distribute the weight of
the load evenly in the cart.
4. Always test to make sure your tractor has adequate
towing and braking capabilities whenever hauling a
substantial amount of weight in your cart. Use extra
caution when operating on slopes.
5. To dump material from the cart, release the spring
latch on the tongue by stepping on the foot pedal
latch. The cart bed will then tilt backwards to empty
its contents. After emptying, pull the front of the bed
down toward the cart tongue until the latch snaps into
place.
6. The maximum towing speed for this cart is 10 m.p.h.
NOtE
DO NOt EXCEED WEiGHt CAPACity OF CARt
(See the specications on this page.)
One cubic foot of dirt weighs approximately 80 lbs.
Tires: 15" x 6" Pneumatic
Axle: 1" Dia. Steel
Capacity: Up to 800 Lbs. Max.
Approx. Sh. Wt. 106 Lbs.
CARt SPECiFiCAtiONS
CAUtiON: tO AVOiD POSSiBLE
iNJURy, BEFORE RELEASiNG tHE
LAtCH BE SURE tHAt NO ONE iS
NEAR tHE CARt.
OPERAtiON MAiNtENANCE