User's Manual

APR650 User Manual
17/11/20 Page 11 of 54
4.1.2.2 WLAN status
Status
Meaning
WLAN is switched on but not connected to an Access Point.
Connected to an Access Point and waiting for connection (listening).
Connection is established (TCP or UDP – port is open)
WLAN init: This symbol is displayed when the WLAN module is currently booting,
being configured or a Firmware update is in progress.
4.1.2.3 Bluetooth status
Status
Meaning
Slave Mode – APR650 can be connected from other devices
Master Mode – APR650 is trying to connect to remote device.
Connected (in either Bluetooth Mode)
Bluetooth init: This symbol is displayed when the Bluetooth module is currently
booting, being configured or a Firmware update is in progress.
4.1.2.4 USB status
The USB status is shown in the middle at the top of the display:
When the APR650 is connected to the USB port of a computer or to a stand-
ard USB power supply, the white USB symbol is shown. Charging the battery
takes longer here compared to using the Agrident USB power supply.
In case the APR650 is connected to an Agrident USB power supply, the sym-
bol changes from white to red. In this case fast charging will be used.