User's Manual

08/10/2007 Vertraulich / Confidential Page 14 of 31
AWR100
On the first Line of the LCD display, the transponder number is displayed in decimal format.
On the second Line of the LCD display, time and transponder type are displayed.
If an event is assigned to the read transponder (at this time only 30 transponders can be as-
signed to an event), the event and the time are displayed alternating in the second line of the
LCD display.
Transponder data plus time and event will be transmitted to the PC via serial interface or Blue-
tooth and can be displayed there.
Simultaneously transponder ID and time are stored in the internal database of the Stick Reader
(without event).
If the key is pressed, while an event is detected, the string "ok" appears after the event string.
Data will be transmitted to the PC again.
If no event is assigned, the data are displayed for approximately seven seconds if the key is not
pressed.
After displaying transponder data the ready to work text appears again:
4.2.2 Reading transponder immediately
Press key until text
appears on the LCD display.
Reading procedure is similar to chapter 4.2.1.
4.3 Using the function menu
After message
appears on the LCD display, the menu of the Stick Reader can be entered by double pressing
the read button. At first the status information's of the Stick Reader are displayed.
Read tag
Press key
984 010900316360
Selection ok
984 010900316360
12:41:26 F
984 010900316360
Selection
984 010900316360
12:41:26 F
Press key