User's Manual

08/10/2007 Vertraulich / Confidential Page 7 of 31
AWR100
1.2 Stick Reader Interface and signalling
Parameter Setting
Red LED The red LED is flashing during the Stick Reader tries
to read transponders. This behaviour can be disabled
or enabled by AWR100 demo software.
Green LED The Green LED is flashing after a transponder was
read.
This behaviour can be disabled or enabled by
AWR100 demo software.
Beeper The Beeper is beeping after a transponder was read.
This behaviour can be disabled or enabled by
AWR100 demo software.
Blue LED The blue LED is used for several events (e.g. trans-
ponder was read, low battery warning).
LCD display On the LCD display all necessary information's are
displayed (e.g. data of read transponder, ready to
work, menu items).
Read button Switches the reader on
Starts reading
Enters the menu by a double clicking after press key
appears on the LCD display.
Screw on end cap Changing battery pack and or end cap
Cable connector Interface for transferring data between Stick Reader
and PC and for trickle charging via RS232 cable