User's Manual

30/09/19 Page 26 of 44
AWR250 User Manual
7.5 Print
The AWR250 allows to send the collected records to a mobile Bluetooth printer. There are
different options available for the printing procedure, like only printing the last group, printing a
particular group or printing all groups. It is also possible to change basic printer settings here.
Please ensure that your printer is set up correctly before you try printing records.
The AWR250 stores the printers Bluetooth address as a secondary address only. When no print
jobs should be done, the AWR250 would always try to connect to its primary Bluetooth partner,
like a computer, smartphone, PDA or weighing indicator in Master Mode. When one of the printing
actions is started, the reader drops the connection to the primary device and tries to connect to
the configured Bluetooth printer.
After the ‘Print’ menu was left, the connection to the printer will be dropped and the AWR250 tries
to re-connect to the configured primary Bluetooth partner again (if in Master Mode). The huge
advantage is that the user does not need to select a different Bluetooth device just for printing.
7.5.1 Print Last Group
Once selected, the AWR250 tries to connect to the configured printer. If connected, this
connection remains active until the ‘Print’ menu was left.
The reader is trying to connect to the Bluetooth printer.
When the connection was established, printing will be
started immediately.
If lots of data have to be printed, a progress bar is visible.
When only a few datasets are sent to the printer, you might
not see it at all.
The AWR250 returns to the printer menu afterwards.
7.5.2 Select Group
This menu item allows to print a particular group instead of the last one or all groups.
Select the group to be sent to the printer using the /
keys and confirm with .
If the Bluetooth connection has not been established yet,
the AWR250 will try to connect to the mobile printer now as
explained in the previous chapter.
If the connection to the printer is established, printing will
start right away.
After printing was finished, the reader returns to the screen shown above.
7.5.3 Print All Groups
This option should be used if the complete memory content, resp. all groups, should be printed.
The procedure is similar to ‘Print Last Group’, there are no further selections required.