User's Manual

30/09/19 Page 28 of 44
AWR250 User Manual
If Bluetooth is switched off, the AWR250 shows the
corresponding error message. In this case please activate
Bluetooth first (see chapter 7.6.3.3)
After the scan has been completed, the available devices
are listed. Please note that not only printers are listed here,
but also other Bluetooth devices. So ideally you should
know the device name of your Bluetooth printer.
Sometimes it might be useful to see the BD-address of the
found devices instead of the names. You may switch
between both views by using the key.
Now you can see the list of discovered devices with their
BD-addresses instead of the device names. Very often, the
BD-address can be found somewhere on a label of a
Bluetooth device. Since this address is unique, it can
quickly help to identify the correct device.
Choose a device from the list and select it by pressing . The AWR250 will store this device as
the Bluetooth printer and will try to connect to it for all coming print jobs until a different device
has been selected.
7.6 Setup
The AWR250 is very flexible concerning its configuration. Several settings can be adjusted
directly in the device menu. Very special settings cannot be modified on the AWR250 itself but
they are software-adjustable only.
A possible software for altering AWR250 settings is AgriLink.
The setup menu is divided into several other menus and submenus, which will be explained in
this chapter. The overview of the complete menu structure is explained in chapter 7.1.