7 TROUBLESHOOTING HORN DOES NOT WORK NO Fuse is OK YES Horn works Replace fuse (§ 6.16.1) YES Problem solved NO Contact an authorized service centre SPEEDOMETER DOES NOT WORK NO Fuse is OK Speedometer works Replace fuse (§ 6.16.
7 TROUBLESHOOTING RESERVE FUEL WARNING LIGHT DOES NOT WORK NO Fuse is OK Reserve fuel warning light works Replace fuse (§ 6.16.
8 TECHNICAL INFORMATION 8.1.
TECHNICAL INFORMATION A - Engine: four-stroke, inline four-cylinder. Double-overhead camshaft valve train with radial valves. Wet sump lubrication. B - Ignition - Power supply: integrated ignitioninjection system. Inductive-discharge electronic ignition. “Multipoint” electronic injection. C - Gearbox: removable, six-speed, with constant-mesh gears. D - Final drive: consisting of drive sprocket, rear sprocket and chain. 8 G - Front suspension: inverted hydraulic fork with external adjusting system.
8 TECHNICAL INFORMATION 8.1.
8 TECHNICAL INFORMATION 8.1.2.
8 TECHNICAL INFORMATION 8.1.3.
TECHNICAL INFORMATION 8 8.1.4.
8 TECHNICAL INFORMATION 8.1.5.
TECHNICAL INFORMATION 8 8.1.6.
8 TECHNICAL INFORMATION 8.2. Specifications Description SPECIFICATIONS Wheelbase (mm) Overall length (mm) Max. width (mm) Seat height (mm) Min. ground clearance (mm) Trail (mm) F4 750 ORO F4 750 S F4 750 S (1+1) 1398 2007 685 790 130 98.5 1398 2007 685 790 130 98.5 1398 2007 685 790 130 98.
8 TECHNICAL INFORMATION Specifications Description Dry weight (kg) Fuel tank capacity (l) Reserve fuel (l) Oil in crankcase (kg) PERFORMANCE Top speed (km/h), over Average fuel consumption (km/l) Max. horsepower at rpm (on shaft) Max. torque at rpm 8 ENGINE Type Bore (mm) Stroke (mm) Total displacement (cm3) Compression ratio Starting Cooling system F4 750 ORO 184 20 4 3.5 F4 750 S 191 20 4 3.5 F4 750 S (1+1) 192 20 4 3.5 281 13 kW 93/12,500 cv 126/12,500 Nm 74/10,500 Kgm 7.5/10,500 ft lb 54.
8 TECHNICAL INFORMATION Specifications Description Crankcase and covers Head and cylinders Valves VALVE TRAIN Type LUBRICATION Type IGNITION - POWER SUPPLY Type Spark plugs Spark gap (mm) CLUTCH Type PRIMARY DRIVE Number of teeth on crankshaft gear Number of teeth on clutch gear Transmission ratio F4 750 ORO sand-cast sand-cast bimetal Nimonic head F4 750 S die-cast chill-cast bimetal/ single-metal F4 750 S (1+1) die-cast chill-cast bimetal/ single-metal Double-overhead camshaft, radial valves Wet sump
8 TECHNICAL INFORMATION Specifications Description SECONDARY DRIVE Number of teeth on front sprocket Number of teeth on rear sprocket Transmission ratio TRANSMISSION Type Gear ratios (overall ratios) First gear Second gear Third gear Fourth gear Fifth gear Sixth gear FRAME Type Swingarm pivot plates FRONT SUSPENSION Type 8 Ø Rod (mm) Travel on leg axis (mm) F4 750 ORO F4 750 S F4 750 S (1+1) Z = 14 Z = 41 2.93 Z = 14 Z = 41 2.93 Z = 14 Z = 41 2.
8 TECHNICAL INFORMATION Specifications Description REAR SUSPENSION Type Swingarm Wheel travel (mm) FRONT BRAKE Type Ø Disc (mm) Disc flange Calipers, piston diameters (mm) REAR BRAKE Type Ø Disc (mm) Caliper, piston diameter (mm) FRONT RIM Material Dimensions REAR RIM Material F4 750 ORO F4 750 S F4 750 S (1+1) Progressive, with single-sided swingarm and single shock absorber adjustable for rebound, compression and spring preload Magnesium alloy Aluminum alloy Aluminum alloy 120 120 120 Dual floating d
8 TECHNICAL INFORMATION Specifications Description Dimensions TYRES Front Rear Brand and type 8 Inflating pressure Front Rear ELECTRICAL EQUIPMENT Equipment voltage Low beam High beam Dual-bulb front parking light Rear light Brake light Turn indicators F4 750 ORO Standard Optional 6.00” x 17” 5.75” x 17” F4 750 S F4 750 S (1+1) 6.00” x 17” 6.
8 TECHNICAL INFORMATION Specifications Description Battery Alternator F4 750 ORO F4 750 S 12V - 9Ah 12V - 9Ah F4 750 S (1+1) 12V - 9Ah 650 W at 5000 rpm 650 W at 5000 rpm 650 W at 5000 rpm BODYWORK Fairing Carbon fibre Thermoplastic material Thermoplastic material Windscreen Carbon fibre Thermoplastic material Thermoplastic material Tail section Carbon fibre Thermoplastic material Thermoplastic material Fuel tank Carbon fibre Air box Carbon fibre Steel Steel Thermoplastic material T
8 TECHNICAL INFORMATION 8.3.
NOTES .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ...............................
NOTES .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ...............................
NOTES .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ...............................
NOTES .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. .............................................................................. ...............................