User's Manual

(12) Relay setting
Set relay mode and delay time
Relay is a kind of switch and operates according to the mode setting as follows.
Relay mode is used to operate the external door lock, warning light, alarm
buzzer, etc. according to the recognition result.
Maximum driving current and voltage: 2A 30VDC, 0.28A 220VAC Excessive use
of the maximum drive current and voltage may cause product defects.
15
No.
Name Description
1 admittance
Relay output when “admittance” judgment is displayed on the
screen(Normal temperature, wearing a mask)
2 No entry
Relay output when “No entry” judgment is displayed on the
screen(High temperature or no mask)
3 Mode 0 Disable relay
4 Mode 1
When the relay is open, it is closed for the set ‘delay time’ and
Then opened again.
5 Mode 2
The relay is closed and opened for the set ‘delay time’ and
Then closed again
6
Delay
time
Set the operation time of the relay.