User's Manual

(2) Inspection setting
This is a detailed setting menu related to face recognition and temperature
measurement.
8
No. Name Description
1 Temperature test Turns the temperature test function on or off.
2
Temperature
compensation
It is used to calibrate the temperature when measured different
from the actual temperature by the external temperature. In
case of manual setting, detailed input field appears. Input value
is between 0 ~ 1 ℃.
3 Scene selection
Setting whether the device is installed indoors or
outdoors.
4 Alarm threshold
If the measured temperature is higher than the entered value,
an alarm message is displayed.
When the temperature alarm is on, a beep sounds.
5
Temperature
alarm
Enable or disable the Alarm.
6
Temperature
display
Change the temperature display format to Celsius (℃) or
Fahrenheit (℉).
7 Fan It set the operation of the fan for heat dissipation.
8 Mask detection
Measure your temperature and check whether wear a mask or
not. When a person without a mask is detected, display a no-
access sign and you can hear the voice.
9 Stranger mode
When it detects a person who is not registered in the
database, it notifies them that it is a stranger.
10 Stranger record
When a stranger is detected, the captured picture is saved
separately.