Owner Manual

HARDWOOD FLOORING CLEANING TIPS
FLOOR CLEANING
Sweep, dust mop, or vacuum regularly using the wand attachment on your vacuum cleaner.
Clean your hardwood floor occasionally using a well-squeezed damp mop and Armstrong
Hardwood & Laminate Floor Cleaner or Bruce Hardwood & Laminate Floor Cleaner.
You can purchase Armstrong floor care products and floor protectors at your local flooring store
or home center.
DON’T use: ammonia-based cleaners, wax-based products, detergents, bleach, polishes, oil
soaps, abrasive cleaning soaps, or acidic materials like vinegar.
FLOOR PROTECTION
Wipe up spills immediately.
When moving appliances or heavy furniture, lay a plywood panel on your floor and "walk" the
item across it to prevent scuffs and tears.
Use doormats at entrances to collect dirt and moisture, so they’re not tracked onto the floor.
Place area rugs (with slip-resistant backing) in front of kitchen sinks, at all pivot points and
within high-traffic areas. DON’T use rubber, foam back, or plastic mats as they could discolor
your floor.
Keep animal nails trimmed to prevent scratches.
Use Armstrong or Bruce® furniture leg protector pads under all furniture legs.
Replace hard, narrow furniture rollers with wide rubber rollers.
Keep the relative humidity in your home between 35% and 55%.
Protect your floor from direct sunlight.
DON'T wear shoes with spike heels or heel taps on your hardwood floor. Remove shoes at the
door to avoid potentially dragging in sharp objects in your shoe treads.
HARDWOOD FLOOR CARE QUICK-FIX TIPS
Spills and Tracked-in Dirt
Clean immediately.
Apply Armstrong Hardwood & Laminate Floor Cleaner or Bruce Hardwood & Laminate Floor
Cleaner lightly to the surface and wipe with a sponge mop or a soft cloth.
NOTE: DON’T use on Bruce Dura Satin Wax finish floors. Refer to Bruce Dura Satin Wax Finish
floor care.

Summary of content (4 pages)