User's Manual

Device size：96X60X22.6mm
Battery capacity：5000mAh Longest standby time：90 days charging time：8 hours
4, Function declaration
4.1 Working mode setting
There are three kinds of working mode. User through setting in the phone APP software
function to set the working mode.
1, rapid positioning (1 minute) : equipment at 1 minute intervals update location information,
rapid positioning model the locator use battery faster.
2,standard positioning (10 minutes) : equipment according to the time of 10 minutes interval
update location information.
3,save electricity positioning (an hour): equipment in one hour time interval update location
information, the power-saving mode use battery is slowly.
4.2 Historical route query
This product can keep 3 months of route information. If two anchor point position is very close,
this product will be in the route filter position very close point.
4.3 Geo-fence
Users in the cell phone APP choose Geo-fence function, on the map can set Geo-fence round, if
the device away from fences, mobile phone APP client-side will display the alarm information. Alarm
information time is related to the positioning interval time setting, The smaller positioning time
interval can get timely alarm information.
4.4 Voice monitoring
Select voice monitoring function in setting up and fill in your mobile phone number, wait for a
while and after confirmation equipment will be sent a calling to your number, you can listen to the
voice around locator after answering. Set up after the white list, the inside of white list number will
send a calling to device, device will automatic answer, can listen to the voice around locator.