Operating instructions

Section 3.5.5) or for a whole measuring operation (also with cyclic scanning),
the averaging mode to be set is ´Cont´ (see Section 6.4.2).
1. Select the AVERAGE VALUE function ´MW´ by pressing the FUNCTION key.
The averaging start and stop can if necessary also be selected
in any other function (e.g. MEASURED VALUE)!
2. Start averaging by pressing the START/
STOP key
The average value is automatically deleted with
each new start ! In the display the ´START´ and
´ ´ arrows light up. All measured data can be saved to memory or output
M
3. Stop averaging by pressing the START/
STOP
key again; the ´START´ and ´ ´ arrows go out.M
The average value can now be read out.
All measured data can be saved to memory or output.
4. For further measuring operations repeat steps 2 and 3 only.
6.4.4 Averaging over single measurements
To determine the average of single isolated measurements at certain locations
or certain times (e.g. network measurements) the averaging mode ´Cont´ is
used. Measured value smoothing can be programmed (see Section 6.4.1)
1. If the ´START´ arrow lights up, stop the current
meas. operation by pressing the START/
STOP key.
2. Select the AVERAGE VALUE function ´AV´ by
pressing the FUNCTION key.
3. Delete the average value before starting each
measuring series by pressing the keys PROG,
CLEAR; (this does not happen automatically) !
4. Select MEASURED VALUE function by pressing M
key.
5. Start manual single measurements by pressing the
MANU key. In the display the arrow appears
M
briefly.
All measured data can be saved to memory
(option “S”) or output.
6. By pressing the FUNCTION key once, the average
value can be displayed.
7. By pressing the FUNCTION key again, the count of
values averaged in the function ´C´ can be dis-
played.
8. You can return to the average value display by
pressing the FUNCTION key and holding it down for
a while.
9. For further measuring series repeat steps 3 to 8.
34 ALMEMO
2390-5
Measuring operations
1: 1 1.5 6
AV
CORR M

1: 1 2.3 4 AV
1: - - - - AV
1: 1 1.2 2 ms
1: 1 2.3 4 ms
1: 0 0 1 2 C