Operation Manual

EXIT ENTER
STAR
T
RE
CDISKCONTROLS
STOP

METRONOME:
Tempo = 30
Metronome = Off
Level = 0
Lead = No
Timing = 30
Rec.Mode = Overdub
> Signature= 1/8
AHLBORN Classical Organs
English Page 65
PRAELUDIUM III - PRAELUDIUM IV/E - User's Manual
Rec-Start-Stop Functions
Pressing the "CONTROLS" button for about two seconds allows you to execute all settings
relative to the Metronome and some of the operating modes of the Sequencer.
(see NOTE).
NOTE: always use the operating buttons to move inside the voices which appear on the display, or to modify the various parameters.
1
Tempo
Setting of the metronome tempo. The adjustment range is that of a normal mechanic metronome: from 30 to
240 beats per m/s.
2
Metronome
Activation/deactivation of the acoustic metronome while playing (On/Off).
3
Level
Acoustic level of the Metronome. The value range goes from 0 dB (maximum volume) to -24 dB (minimum
volume).
4
Lead
Activation/deactivation of the pause beat before recording starts (Yes/No). When this function is on, it stops
recording data in the Sequencer during the first metronome measure. It is recommended to deactivate this
function when the organ is connected to a sequencer or external computer.
5
Timing
Selection of the metre-operating mode for the advancement of the musical sequence in use. Settings can be
adjusted by number of measures (Measure), or by minute and seconds (mm:ss).
The following indications will appear on the display:
METRONOME AND SEQUENCER SETTINGS
They refer to the following parameters: