y/ Spare Parts Legs and Washers | Middle leg fasteners 1we Mattress stopper Nek 1g] a ei Pledge chuck the packing list while unpacking the bo to ensure you received all necessary pals for assembling the bed base Should vol find ny pans of the bed Base miss.
JM Assembly Instructions 1 Unfold the base to full extension. Put middies leg fastener into position C to prevent the base from folding while in motion, Attach the middies legs respectively.
JM Assembly Instructions 4 Flip the base over PUI the foot retainer of and connect to adapter c Please check to make sire that all sup Port arms are in the right place and stable 3
AT The weight should be evenly distributed across the bed base during the operation of the bed base Any pus conduct such as notwithstanding on the head of foot section of the bed a= well 38 Jumping off the bed is remedy prohibited! Customers who fal Io obey the warning will be responsible for the damage or malfunction of the bed base and said damage will not be covered by our warranty.
W) rescission Thai TV/ZG/ZZZ position can be reset to your preference Refer to the following steps to reset the TV/ZG/ZZZ position. 1 Adjust the bed base to your preferred head & foot position. Long press & and §& button ford seconds, This background light will flicker. 3 Press any inferiority button within © seconds to stop the flicker. 4 At the satire time, pass @ and @ button on the foot. The light will flash for 6 seconds + to restate the initial position.
JM Convenient “Flat button” 1 Long press the “Flat bunion “on the control box until the bed base goes down to-flat position. 2 During the reset process, release the button and the operation stops; Press the reset button again to continue the reset action. Power supply: connect DC 29V DC power supply Head manna be hand mini Flat butter W) corrective Clean surfaces with a dry or damp soft cloth. Make sure the storm control system is well connected before use.