Users Manual Part 2

ManualsBrandsAI.MON ManualsElectronicsSMART MONITORING BAND

Step 1 : Band, gateway, and smart phone connection guide

· Power on the band and the gateway and follow the app’s instructions to

connect communications.

· If the connecting WiFi changes by moving to another place, you need to set it again.

Step 2 : Account creation

· Complete Step 1, and enter your desired ID, password, and email in <<Account>>/

· Follow the instructions on the app, then a new account will be created.

Step 4 : Wearing the band and measurement

· Select acc band that fits the baby’s age-in-months and its body and combine the

acc band with the band body. Put it around the baby’s ankle.

(See at the bottom of the <FAQ-How to wear properly> at the bottom of the 《Menu》screen)

· You can check the real time information being measured on the main screen of the app.

You can check detailed usage in the FAQs.

· beginner → basic FAQ : 1~6 (app and home page)

· troubleshooting → additional FAQ : A1~A6 (home page)

· useful info → Tip FAQ : B1~B6 (home page)

Step 3 : Baby registration, the date of birth, and range settings

· Complete Step 2, and when <<baby info settings>>/<baby registration> done,

basic operation will start according to the date of birth.

For more specific registration, use the range settings using the references.

4.2 Paired App (phone) and Shared App (phone)

① The phone that connects to the gateway is the paired App (phone).

Paired App (phone) is a phone that communicates directly with the gateway.

It initially connects to the gateway and becomes a paired App(phone).

It registers the gateway and creates an account.

② You can change the paired App while the device is operating.

Paired App with the gateway can be changed in <<settings>>/

<pairing and unpairing>.

Paired App (phones) performs the following roles;

It sends your baby’s information to you when WiFi is not available.

You can check the wearing check and communication conditions.

③ Shared App (phone) is an app that accesses your account with your

account ID and password.

Create an account with a paired phone first. Next, access the account and

password with another phone. It becomes a shared app (phone), and

all the information that the paired app receives will be shared.

Information required to use the App

App Display and Monitoring Display

4.1 Introduction to setting up procedures for App operation

Step 1: Install the app on your phone and connect it to the gateway.

Step 2: Create an account following the instructions on the app.

Step 3: Go to the baby registration and range settings.

Step 4: Put the product on the baby’s ankle and check the app screen.

Step 5: Check the communication condition and ensure that the acc

band are properly attached.

※Installation conditions

[product compatibility] AI.MON smart band product can be connected to a

smartphone that meets the specifications below.

iOS 10 or later, Android 6.0 or later, Bluetooth 4.1 or Later