OPERATION MANUAL SAFETY INFORMATION FCC STATEMENT OPERATION MANUAL SAFETY INFORMATION FCC STATEMENT OPERATION MANUAL SAFETY INFORMATION FCC STATEMENT
TABLE OF CONTENTS OVERVIEW 1-2 SETUP 3-5 TOUCH SCREEN 6-10 SAFETY INFORMATION 11-12 FCC STATEMENT 13 TABLE OF CONTENTS OVERVIEW 1-2 SETUP 3-5 TOUCH SCREEN 6-10 SAFETY INFORMATION 11-12 FCC STATEMENT 13 TABLE OF CONTENTS OVERVIEW 1-2 SETUP 3-5 TOUCH SCREEN 6-10 SAFETY INFORMATION 11-12 FCC STATEMENT 13
1 OVERVIEW 2. 1. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 1. Machine Head 14. 2. Flip Cover 3. Touch Screen 4. Cutting Strip 5. Tool Holder Holds cutting blade housing or marker adapter 6. Feed Tray Helps stabilize material 7. Adjustable Pinch Rollers Feeds material in and out of the cutter 8. Power Button 9. Pinch Roller Levers Locks down or releases adjustable pinch rollers 10. USB-A Port Used for connecting flash drives to cutter 11. USB-B Port Used for connecting cutter to a computer 12.
2 MARKER ADAPTER 45º BLADE 60º BLADE BLADE HOUSING USB CORD POWER CORD AND POWER SUPPLY 12X12 CUTTING MAT 1 2 3 4 5 6 7 8 9 10 11 12 12 11 10 0 11 1 10 2 9 3 8 4 7 5 6 6 5 7 4 8 3 9 2 10 1 11 0 1 2 3 4 5 6 7 8 9 12 12 ALSO INCLUDED IN PACKAGING: TWO SHEETS OF 6X12IN SISER® HEAT TRANSFER VINYL ONE COVER SHEET *Items shown are not to scale
3 JULIET™ SETUP Setup your cutter online at siser.com/websitelink Get the Leonardo Design StudioTM basic monthly subscription for free with your cutter purchase OR SETUP MANUALLY USING THE FOLLOWING INSTRUCTIONS 1 Remove all protective packaging from cutter and accessories, including plastic wrap. 2 Plug the round end of the power cord into the DC power port on the rear of the machine, then plug the opposite end into a standard electrical outlet. Press the power button to turn the cutter on.
4 5 Insert blade housing into tool holder on the machine head with the blade facing down. Turn the knob on the tool holder clockwise to tighten. 6 Lower the roller bar lever and raise the pinch roller levers from the rear of the cutter. Adjust pinch rollers as needed then lower pinch roller levers to lock them in place. 7 Lower pinch rollers by flipping the roller bar lever up from the rear of the cutter.
5 Identifying a Good Test Cut Cut not deep enough and can’t be weeded 10 Material and carrier cut through Material cut and carrier not cut through Once you’re ready to cut, plug in the USB flash drive via the USB-A port on the rear of the cutter. Tap the ‘Settings’ button, then ‘USB’. Select your cut file* from the drop down. *Accepted file type: .PLT 11 SETTINGS CUT SETTINGS TEST CUT Move the position of the blade by using the on-screen arrow buttons.
6 TOUCH SCREEN Navigate by tapping the touch screen to select an option or slide along a bar to adjust values. HOME SCREEN 1. 2. 3. SETTINGS 5. CUT SETTINGS 6. TEST CUT 7. 4. 1. WiFi Indicator — Displays WiFi connection status 2. Directional Arrows — Moves material and machine head 3. Play Button — Starts job using current settings 4. Tool Reorientation — Moves tool holder back to starting position 5. Settings — Opens cutter settings menu 6.
7 CUT SETTINGS 3. 2. CUT SETTINGS 1. 6. PRESET CUT SPEED 4. 40 FORCE 5. TEST CUT 560 Adjust the cut settings of the cutter 1. Back Button — Returns to previous screen 2. Home Button — Returns to the Home Screen 3. Cutting Presets — Opens preset cutting menu 4. Cut Speed — Adjusts how fast the machine head moves 5. Force — Adjusts how much pressure the machine head exerts 6.
8 GENERAL SETTINGS GENERAL SETTINGS LED 1. ALERT 2. SLEEP UNIT LANGUAGE 3. 4. 5. Make general adjustments to your cutter 1. LED — Turn the LED ON/OFF and adjust the brightness 2. Alert — Turn the chime and/or LED ON/OFF that indicates a completed job 3. Sleep — Set how much time of inactivity will put the cutter to sleep 4. Unit — Choose between metric and imperial measurements 5. Language — Select desired language WIFI WIFI NETWORK NAME NETWORK NAME PASSWORD PASSWORD123 IP ADDRESS SCAN 1.
9 CAMERA CAMERA 2. 3. 1. 4. OK 5. 6. Use the camera for accurate tool registration 1. Registration Snapshot — Crosshair overlay offers a visual preview of the tool orientation 2. Zoom — Zooms in or out on the current snapshot 3. Camera Snapshot — Takes a snapshot at the tool’s current position 4. OK — Sets tool position and returns to Home Screen for job 5. Directional Arrows — Moves the machine head and material for a different camera view 6.
10 SYSTEM INFORMATION SYSTEM INFORMATION MODE: 024 HVER: V7.1201 SVER: V20.0811 MPID: 087C-8726-4644-0768 BAUD: 67800-L DEFAULT ALL SETTINGS 1. Displays cutter system information 1.
11 SAFETY INFORMATION Please read all safety information before product use. Warning: Risk of Injury, Fire, and Electric Shock Use of the product in a manner not outlined in this document or other official material provided by Siser®, may result in damage to the product, property damage, injuries or fatal injury. For Indoor Use Only The product is to be used and stored in dry indoor locations only, that are kept between 35°C and 5°C. Do not operate Product in or near liquids.
12 Do not use a broken blade. Remove the broken blade from the blade housing with tweezers. Do not load unintended materials onto the cutting mat or into the cutter. Keep objects, hair, loose jewelry, clothing, and fingers away from the product when it is operating, as injuries may result from the rapid movements. Do not touch the cutting mat or materials when the product is operating until the cutting mat or materials are unloaded from the product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
