AIC LB31-070XJ Specifications Sheet

Willow Springs Distributing, LLC
# N7071 US Highway 45, Wittenberg, WI 54499
Phone [phone] Fax [phone]
Information needed to Size
a plate to plate heat exchanger
Parameter 2
Incoming Water
temp from the
heat source.
Parameter 3
Leaving Water
temp back to the
heat source.
Parameter 4
Water temp going
to the load side.
Parameter 5
Incoming Water
temp from the
load side.
Parameter 1
Load Side BTU’s Needed
Or
Load side GPM
Other useful information on the
source side:
Operating pressure
% of Glycol if any
Max pressure drop or acceptable
head pressure.
Other useful information on the
load side:
Operating pressure
% of Glycol if any
Max pressure drop or acceptable
head pressure.
This shows counter current flow design
WARNING PLEASE MAKE NOTE: THIS UNIT
IS NOT FOR USE IN POOL APPLICATIONS!!!
Parameters In Red Are Required!
7-1-10